Skip to content
TapBuff

Williamstown Water Dept

EPA’s and Massachusetts’s records have results for 37 contaminants in its water; 1 was found.

Serves 7,326 people · Groundwater · Williamstown, MA · Hardness: soft

Serves
7,326 people
Connections
2,119
Water source
Groundwater
Based in
Williamstown, MA
County
Berkshire
Owner
Local government
Hardness
Soft
The 2 ZIP codes it serves

01267, 05261

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 18 to Nov. 12, 2025.

Nitrate, arsenic, chromium (total), fluoride, haloacetic acids (HAA5) and total trihalomethanes (TTHM): Massachusetts’s own results, samples taken from Aug. 12, 2020 to Aug. 4, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 1 result

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 0.094 ppm

Highest sample; found in 11 of 16 · 2025 average: 0.06 ppm · Comes from the source

The highest sample, in 2022, was 0.094 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.3 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Massachusetts utilities above EPA’s PFAS limits⁠
36 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride
  • Haloacetic acids (HAA5)
  • Lead
  • Total trihalomethanes (TTHM)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Soft, 13 mg/L (0.7 grains per gallon), at its one sampling point, in 2017.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Williamstown Water Dept reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, arsenic, chromium (total), fluoride, haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Massachusetts’s own from 2020 on, with EPA’s national file for 2012 to 2019. Williamstown Water Dept’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 18 to Nov. 12, 2025; Massachusetts’s results run from Aug. 12, 2020 to Aug. 4, 2026.

Testing your own tap

Williamstown Water Dept’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Massachusetts certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Williamstown Water Dept’s latest lead sampling in EPA’s records, 2019 to 2021, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Massachusetts certifies closest to the area Williamstown Water Dept serves, or a kit by mail

The 3 labs Massachusetts certifies closest to the area Williamstown Water Dept serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Capital Region Environmental Laboratory

    Rensselaer, NY · about 26 miles

    Certified for bacteria

    (518) 949-2020

  • Microbac Laboratories Inc.

    Lee, MA · about 29 miles

    Certified for bacteria

    (413) 776-5025

  • Howard Laboratories LLC

    South Deerfield, MA · about 35 miles

    Certified for bacteria

    (413) 247-5533

All 81 certified labs for Massachusetts⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Massachusetts certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Massachusetts’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MA1341000. Rebuilt from EPA data on Oct. 25, 2026.