Skip to content
TapBuff

Randolph/Holbrook Joint Water Board

EPA’s and Massachusetts’s records have results for 6 contaminants in its water; 4 were found.

Serves 46,519 people · Surface water · Randolph, MA · Hardness: soft

Serves
46,519 people
Connections
2
Water source
Surface water
Based in
Randolph, MA
County
Norfolk
Owner
Local government
Hardness
Soft
The ZIP code it serves

02343

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

Fluoride, nitrate, arsenic and chromium (total): Massachusetts’s own results, samples taken from March 18, 2020 to Jan. 20, 2026, with EPA’s 2012 to 2019 file for earlier years.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from May 8, 2012 to Aug. 15, 2013. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 50.2 ppb

Highest yearly average, 2012 to 2013 · 2013 average: 39.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 50.2 ppb, in 2012, below EPA’s legal limit of 80 ppb. Its highest single sample was 99.2 ppb. In 2013, the latest year on file, its 16 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility from 2012 to 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 23.3 ppb

Highest yearly average, 2012 to 2013 · 2013 average: 14.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 23.3 ppb, in 2012, below EPA’s legal limit of 60 ppb. Its highest single sample was 33.3 ppb. In 2013, the latest year on file, its 12 samples averaged below the limit.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.26 ppm

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 0.26 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.2 ppm

Highest sample; found in 5 of 7 · 2026: not found · Comes from the source

The highest sample, in 2023, was 0.2 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.2 ppm, in 2015.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)

Violations since 2016

No health-based violations on file with EPA since 2016. There are 5 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Soft, 58 mg/L (3.4 grains per gallon), at its one sampling point, 2015 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

What this report can’t tell you

  • Everything else. Fluoride, nitrate, arsenic and chromium (total) results here are Massachusetts’s own from 2020 on, with EPA’s national file for 2012 to 2019. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) come from EPA’s file alone, which ends in 2019. Randolph/Holbrook Joint Water Board’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Massachusetts’s results run from March 18, 2020 to Jan. 20, 2026; EPA’s compliance samples are from May 8, 2012 to Aug. 15, 2013.

Testing your own tap

Randolph/Holbrook Joint Water Board’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Massachusetts certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. About lead.
The 3 labs Massachusetts certifies closest to the area Randolph/Holbrook Joint Water Board serves, or a kit by mail

The 3 labs Massachusetts certifies closest to the area Randolph/Holbrook Joint Water Board serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Matrix Sciences International Inc.

    Canton, MA · about 7 miles

    Certified for bacteria

    (781) 401-9999

  • G and L Labs Inc.

    Quincy, MA · about 9 miles

    Certified for bacteria

    (617) 328-3663

  • Battelle Memorial Institute

    Norwell, MA · about 9 miles

    Certified for PFAS

    (781) 681-6635

All 81 certified labs for Massachusetts⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Massachusetts certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Massachusetts’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MA4244001. Rebuilt from EPA data on Oct. 25, 2026.