Skip to content
TapBuff

Palmer Water District No.1

EPA’s and Massachusetts’s records have results for 37 contaminants in its water; 6 were found.

Serves 4,789 people · Surface water · Palmer, MA · Hardness: soft

Serves
4,789 people
Connections
1,378
Water source
Surface water
Based in
Palmer, MA
County
Hampden
Owner
Local government
Hardness
Soft
The ZIP code it serves

01069

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 2 health-based violations since 2016, none with a fix on record in EPA’s file.

Filters for lead, if you want it lower⁠The 2 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 7 to Oct. 8, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2006 to 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, chromium (total) and arsenic: Massachusetts’s own results, samples taken from Jan. 15, 2020 to Aug. 13, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 6 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 37.4 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 24.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 37.4 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 89 ppb. In 2026, the latest year on file, its four samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 25.6 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 22.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 11.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 22.6 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 56.7 ppb. In 2026, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 14.4 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Lead, Action level 15 ppb · health goal zero; 90th percentile 4.9 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 4.9 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Nitrate, Legal limit 10 ppm; highest 0.6 ppm

Highest sample; found in 12 of 15 · 2025 average: 0.27 ppm · Comes from the source

The highest sample, in 2021, was 0.6 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.58 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.13 ppm

Highest yearly average, 2020 to 2023 · 2023: not found · Forms or is added in treatment

Averaged by year, the highest was 0.13 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.19 ppm. In 2023, the latest year on file, it wasn’t found in any of its three samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.14 ppm, in 2012.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 2.3 ppb

Highest yearly average, 2020 to 2023 · 2023: not found · Comes from the source

Averaged by year, the highest was 2.3 ppb, in 2020, below EPA’s legal limit of 100 ppb. Its highest single sample was 2.4 ppb. In 2023, the latest year on file, it wasn’t found in any of its three samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.1 ppb, in 2013.

What handles it

About chromium (total)
Massachusetts utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

2 health-based violations since 2016, all for the Surface Water Treatment Rule. The latest began Jan. 1, 2025, and none has a fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Jan. 1, 2025 to Jan. 31, 2025No fix on recordEPA: archived
Dec. 1, 2024 to Dec. 31, 2024No fix on recordEPA: archived

Health-based violations only. 1 monitoring or reporting violation not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Hardness

Soft, typically 54 mg/L (3.1 grains per gallon), across 3 sampling points, 2017 to 2020.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Palmer Water District No.1 reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, chromium (total) and arsenic results here are Massachusetts’s own from 2020 on, with EPA’s national file for 2012 to 2019. Palmer Water District No.1’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 7 to Oct. 8, 2025; Massachusetts’s results run from Jan. 15, 2020 to Aug. 13, 2026.

Testing your own tap

Palmer Water District No.1’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Massachusetts certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Palmer Water District No.1’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 4.9 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Massachusetts certifies closest to the area Palmer Water District No.1 serves, or a kit by mail

The 3 labs Massachusetts certifies closest to the area Palmer Water District No.1 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Quabbin Analytical Laboratory

    Belchertown, MA · about 8 miles

    Certified for bacteria

    (413) 323-7134

  • Pace Analytical LLC-East Longmeadow

    East Longmeadow, MA · about 13 miles

    Certified for bacteria, nitrate, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS

    (413) 525-2332

  • Vallid Labs Inc.

    Agawam, MA · about 19 miles

    Certified for bacteria

    (413) 789-2206

All 81 certified labs for Massachusetts⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Massachusetts certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Massachusetts’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MA1227000. Rebuilt from EPA data on Oct. 25, 2026.