Skip to content
TapBuff

Franklin Water Department

EPA’s and Massachusetts’s records have results for 37 contaminants in its water; 11 were found.

Serves 33,706 people · Groundwater · Franklin, MA · Hardness: varies by source

Serves
33,706 people
Connections
9,633
Water source
Groundwater
Based in
Franklin, MA
County
Norfolk
Owner
Local government
Hardness
Varies by source
The ZIP code it serves

02038

The short answer

None of the results here is above a limit in force today. PFOA is above EPA’s new limit, which takes effect in 2029. PFOS had a sample above it, but not on average, the way EPA will judge it. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Oct. 10, 2024 to June 17, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2014 to 2025.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 3.5 ppm, for the period ending Dec. 31, 1992. None since is on file, so it is not counted as a current finding.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, chromium (total) and arsenic: Massachusetts’s own results, samples taken from Jan. 30, 2020 to Sept. 15, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOS, PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. One other PFAS with no federal limit was found, the highest PFHxA at 3.6 ppt: see it below.

Above EPA’s new limit, which takes effect in 2029, 1 result

PFOA

Comes from the source

Above EPA’s new limit (2029)

4.7 ppt

Highest sample, Oct. 15, 2024; found in 3 of 14

The highest sample was 4.7 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 4.4 ppt, also above it.

What handles it

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOS

Comes from the source

A sample above EPA’s 2029 limit

5.6 ppt

Highest sample, Oct. 15, 2024; found in 1 of 14

The highest sample was 5.6 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 2.8 ppt, below it.

What handles it

Below EPA’s limits, 8 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 57.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 21.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 57.8 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 72.7 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 35.5 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 36 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 8.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 36 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 37.1 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 6.5 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 5.7 ppm

Highest sample; found in 65 of 66 · 2026 average: 2.9 ppm · Comes from the source

The highest sample, in 2026, was 5.7 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its nine samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 5.3 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
PFHxS, EPA’s 2029 limit 10 ppt; highest 5.4 ppt

Highest sample, June 17, 2025; found in 2 of 14 · Comes from the source

The highest sample was 5.4 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.1 ppm

Highest yearly average, 2021 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 1.1 ppm, in 2026, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.3 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.95 ppm, in 2012.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.0 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
PFBS, Health benchmark 2,000 ppt; highest 3.7 ppt

Highest sample, April 8, 2025; found in 5 of 14 · Comes from the source

The highest sample was 3.7 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
Chromium (total), Legal limit 100 ppb; highest yearly average 0.15 ppb

Highest yearly average, 2021 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.15 ppb, in 2021, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.2 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)4.7 ppt highest, found in 3 of 14 samples. Details
PFOS4.0 pptA sample above EPA’s 2029 limit5.6 ppt highest, found in 1 of 14 samples. Details
PFHxS10 pptBelow EPA’s limits5.4 ppt highest, found in 2 of 14 samples. Details
PFNA10 pptNot foundNot found in any of 14 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 14 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits3.7 ppt highest, found in 5 of 14 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Massachusetts utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFHxA3.6 ppt1 of 14None covers it
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Lead Reduction

    For: PFOS, PFOA, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Lead Reduction

    For: PFOS, PFOA, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Soft to moderately hard depending on the source, 37 to 91 mg/L (2.2 to 5.3 grains per gallon), across 11 sampling points, 2015 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Franklin Water Department reported another disinfectant and ozone but neither chlorine nor chloramine, in its 2024 to 2025 sampling for EPA.

What that means

Most utilities add chlorine or chloramine, CDC says. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, chromium (total) and arsenic results here are Massachusetts’s own from 2020 on, with EPA’s national file for 2012 to 2019. Franklin Water Department’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Oct. 10, 2024 to June 17, 2025; Massachusetts’s results run from Jan. 30, 2020 to Sept. 15, 2026.

Testing your own tap

Franklin Water Department’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Massachusetts certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Franklin Water Department’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 2.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Franklin Water Department’s results flag: PFOS and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Massachusetts certifies closest to the area Franklin Water Department serves, or a kit by mail

The 3 labs Massachusetts certifies closest to the area Franklin Water Department serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Proverde Environmental, Inc.

    Milford, MA · about 8 miles

    Certified for PFAS

    (617) 221-3356

  • Pace Analytical LLC-Mansfield-320 Forbes

    Mansfield, MA · about 11 miles

    Certified for lead and copper, metals, PFAS

    (508) 822-9300

  • White Lodge Laboratory

    Westwood, MA · about 14 miles

    Certified for bacteria

    (781) 710-6498

All 81 certified labs for Massachusetts⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Massachusetts certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Massachusetts’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MA2101000. Rebuilt from EPA data on Oct. 25, 2026.