Essex Water Dept.
EPA’s and Massachusetts’s records have results for 7 contaminants in its water; 4 were found.
Serves 3,675 people · Groundwater · Essex, MA · Hardness: soft
- Serves
- 3,675 people
- Connections
- 1,124
- Water source
- Groundwater
- Based in
- Essex, MA
- County
- Essex
- Owner
- Local government
- Hardness
- Soft
The ZIP code it serves
The short answer
None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.
What was found
Where these results come from, and when
Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), nitrate, arsenic and chromium (total): Massachusetts’s own results, samples taken from May 12, 2020 to Aug. 10, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
Below EPA’s limits, 4 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 55.9 ppb
Highest yearly average, 2020 to 2026 · Forms or is added in treatment
Averaged by year, the highest was 55.9 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 57.4 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 46.5 ppb, in 2014.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.86 ppm
Highest yearly average, 2021 · Forms or is added in treatment
Averaged by year, the highest was 0.86 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.2 ppm, in 2012.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 7.7 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 5.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 7.7 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 10.6 ppb. In 2026, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 11 ppb, in 2013.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 0.27 ppm
Highest sample; found in 7 of 7 · 2026, one sample: 0.24 ppm · Comes from the source
The highest sample, in 2023, was 0.27 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.28 ppm, in 2014.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
- Arsenic
- Chromium (total)
- Lead
Violations since 2016
No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Hardness
Soft, 38 mg/L (2.2 grains per gallon), at its one sampling point, 2018 to 2023.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), nitrate, arsenic and chromium (total) results here are Massachusetts’s own from 2020 on, with EPA’s national file for 2012 to 2019. Essex Water Dept.’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Massachusetts’s results run from May 12, 2020 to Aug. 10, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Essex Water Dept.’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Massachusetts certifies closest to the area Essex Water Dept. serves, or a kit by mail
The 3 labs Massachusetts certifies closest to the area Essex Water Dept. serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Biomarine Inc.
Gloucester, MA · about 5 miles
Certified for bacteria
New England Chromachem Inc.
Salem, MA · about 9 miles
Certified for organic chemicals, disinfection byproducts, PFAS
Eurofins Danvers
Danvers, MA · about 10 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Massachusetts certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Massachusetts’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded
- Get the utility’s own reportEssex Water Dept. must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Massachusetts Department of Environmental Protection, Drinking Water Program, results from Jan. 2, 2020 to Oct. 5, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Certified labs: MassDEP Online Searchable Laboratory Certification Listing, potable water, read Oct. 16, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Massachusetts Department of Environmental Protection, Drinking Water Program, results from July 10, 2018 to July 11, 2023, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID MA3092000. Rebuilt from EPA data on Oct. 25, 2026.