Skip to content
TapBuff

Duxbury Water Department

EPA’s and Massachusetts’s records have results for 37 contaminants in its water; 15 were found.

Serves 16,387 people · Groundwater · Duxbury, MA · Hardness: soft

Serves
16,387 people
Connections
5,792
Water source
Groundwater
Based in
Duxbury, MA
County
Plymouth
Owner
Local government
Hardness
Soft
The ZIP code it serves

02332

The short answer

None of the results here is above a limit in force today. PFOS, PFHxS and PFOA are above EPA’s new limit, which takes effect in 2029. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from July 17, 2024 to May 6, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2023.

Nitrate, fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and chromium (total): Massachusetts’s own results, samples taken from Jan. 28, 2020 to Aug. 20, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOS, PFHxS, PFOA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Six other PFAS with no federal limit were found, the highest PFPeA at 46.6 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 3 results

PFOS

Comes from the source

Above EPA’s new limit (2029)

35 ppt

Highest sample, Jan. 14, 2025; found in 2 of 16

The highest sample was 35 ppt, about 8.8 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 34.7 ppt, also above it.

What handles it

PFHxS

Comes from the source

Above EPA’s new limit (2029)

31 ppt

Highest sample, Oct. 8, 2024; found in 2 of 16

The highest sample was 31 ppt, about 3.1 times EPA’s new limit of 10 ppt, which takes effect in 2029. EPA’s health goal is 10 ppt.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 29.3 ppt, also above it.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

7.5 ppt

Highest sample, Oct. 8, 2024; found in 3 of 16

The highest sample was 7.5 ppt, about twice EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 6.3 ppt, also above it.

What handles it

Below EPA’s limits, 6 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Nitrate, Legal limit 10 ppm; highest 5.3 ppm

Highest sample; found in 51 of 51 · 2026 average: 3.0 ppm · Comes from the source

The highest sample, in 2025, was 5.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.1 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 4.4 ppb

90th percentile, 2023 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 4.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.59 ppm

Highest yearly average, 2023 to 2026 · 2026 average: 0.55 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.59 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.2 ppm. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.9 ppm, in 2015.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 11.8 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 11.8 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 44.7 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 6.3 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 4.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 1.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 4.9 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 10.3 ppb. In 2026, the latest year on file, its seven samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.2 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFBS, Health benchmark 2,000 ppt; highest 3.5 ppt

Highest sample, Oct. 8, 2024; found in 2 of 16 · Comes from the source

The highest sample was 3.5 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)7.5 ppt highest, found in 3 of 16 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)35 ppt highest, found in 2 of 16 samples. Details
PFHxS10 pptAbove EPA’s new limit (2029)31 ppt highest, found in 2 of 16 samples. Details
PFNA10 pptNot foundNot found in any of 16 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 16 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits3.5 ppt highest, found in 2 of 16 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Above EPA’s new limit (2029)2.93 at its highest sampling location, Partridge Road GP Well
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Massachusetts utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA46.6 ppt2 of 16None covers it
PFHxA30.7 ppt2 of 16None covers it
PFBA12.9 ppt2 of 16None covers it
PFHpA10.6 ppt2 of 16NSF/ANSI 53: Total PFAS Reduction
6:2 FTS5.7 ppt1 of 16None covers it
PFHpS3.3 ppt2 of 16None covers it
22 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, Total PFAS Reduction, PFOA Reduction, Lead Reduction

    For: PFOS, PFHxS, PFOA, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Perfluorohexane Sulfonic Acid (PFHxS)

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Lead Reduction

    For: PFOS, PFOA, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Soft, typically 34 mg/L (2 grains per gallon), across 11 sampling points, 2018 to 2021.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Duxbury Water Department reported adding chloramine before water enters its pipes, at all 8 of its sampling points, in its 2024 to 2025 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Nitrate, fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and chromium (total) results here are Massachusetts’s own from 2020 on, with EPA’s national file for 2012 to 2019. Duxbury Water Department’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from July 17, 2024 to May 6, 2025; Massachusetts’s results run from Jan. 28, 2020 to Aug. 20, 2026.

Testing your own tap

Duxbury Water Department’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Massachusetts certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Duxbury Water Department’s latest lead sampling in EPA’s records, 2023, had a 90th percentile of 4.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Duxbury Water Department’s results flag: PFOS, PFHxS and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Massachusetts certifies closest to the area Duxbury Water Department serves, or a kit by mail

The 3 labs Massachusetts certifies closest to the area Duxbury Water Department serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Battelle Memorial Institute

    Norwell, MA · about 10 miles

    Certified for PFAS

    (781) 681-6635

  • Eurofins Providence (AB)

    Middleborough, MA · about 14 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (508) 946-2225

  • G and L Labs Inc.

    Quincy, MA · about 22 miles

    Certified for bacteria

    (617) 328-3663

All 81 certified labs for Massachusetts⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Massachusetts certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Massachusetts’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MA4082000. Rebuilt from EPA data on Oct. 25, 2026.