Skip to content
TapBuff

Bedford Water Dept.

EPA’s and Massachusetts’s records have results for 37 contaminants in its water; 4 were found.

Serves 14,955 people · Surface water bought from another system · Bedford, MA · Hardness: varies by source

Serves
14,955 people
Connections
4,826
Water source
Surface water bought from another system
Based in
Bedford, MA
County
Middlesex
Owner
Local government
Hardness
Varies by source
The ZIP code it serves

01730

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 10 to Oct. 17, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2013 to 2025.

Total trihalomethanes (TTHM), haloacetic acids (HAA5) and nitrate: Massachusetts’s own results, samples taken from Feb. 5, 2020 to Aug. 5, 2026, with EPA’s 2012 to 2019 file for earlier years.

Arsenic, chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from Aug. 14, 2018 to Aug. 14, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 4 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Lead, Action level 15 ppb · health goal zero; 90th percentile 4.0 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 4.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 18.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 9.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 18.5 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 54.2 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 27 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 12.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 9.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 12.1 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 37.8 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 12.2 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 0.7 ppm

One sample · 2021, one sample: 0.7 ppm · Comes from the source

The highest sample, in 2021, was 0.7 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.65 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Massachusetts utilities above EPA’s PFAS limits⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Hardness

Soft to moderately hard depending on the source, 31 to 70 mg/L (1.8 to 4.1 grains per gallon), across 4 sampling points, 2017 to 2021.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Bedford Water Dept. reported adding chloramine before water enters its pipes, at its one sampling point, in its 2024 sampling for EPA. It also reported ozone and ultraviolet light.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5) and nitrate results here are Massachusetts’s own from 2020 on, with EPA’s national file for 2012 to 2019. Arsenic, chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. Bedford Water Dept.’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 10 to Oct. 17, 2024; Massachusetts’s results run from Feb. 5, 2020 to Aug. 5, 2026; EPA’s compliance samples are from Aug. 14 to 14, 2018.

Testing your own tap

Bedford Water Dept.’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Massachusetts certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Bedford Water Dept.’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 4.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Massachusetts certifies closest to the area Bedford Water Dept. serves, or a kit by mail

The 3 labs Massachusetts certifies closest to the area Bedford Water Dept. serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Eurofins Ayer

    Ayer, MA · about 15 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (978) 391-4428

  • Mass DPH Environmental Chemistry Lab

    Jamaica Plain, MA · about 16 miles

    Certified for lead and copper, metals

    (617) 983-6654

  • Eurofins Danvers

    Danvers, MA · about 18 miles

    Certified for bacteria

    (978) 777-4442

All 81 certified labs for Massachusetts⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Massachusetts certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Massachusetts’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MA3023000. Rebuilt from EPA data on Oct. 25, 2026.