Andover Water Dept
EPA’s and Massachusetts’s records have results for 37 contaminants in its water; 5 were found.
Serves 36,569 people · Surface water · Andover, MA · Hardness: soft
- Serves
- 36,569 people
- Connections
- 10,110
- Water source
- Surface water
- Based in
- Andover, MA
- County
- Essex
- Owner
- Local government
- Hardness
- Soft
The short answer
None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 2 health-based violations since 2016, 1 with no fix on record in EPA’s file.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Jan. 16 to Oct. 1, 2025.
Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), nitrate, arsenic and chromium (total): Massachusetts’s own results, samples taken from Jan. 7, 2020 to Sept. 8, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. One other PFAS with no federal limit was found, the highest PFPeA at 4.0 ppt: see it below.
Below EPA’s limits, 4 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 54.4 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 41.6 ppb · Forms or is added in treatment
Averaged by year, the highest was 54.4 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 72.7 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 44.1 ppb, in 2019.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.66 ppm
Highest yearly average, 2020 to 2026 · 2026 average: 0.44 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.66 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.73 ppm. In 2026, the latest year on file, its nine samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.9 ppm, in 2014.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 8.2 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 6.5 ppb · Forms or is added in treatment
Averaged by year, the highest was 8.2 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 16.4 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 6.1 ppb, in 2012.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 0.41 ppm
Highest sample; found in 5 of 5 · 2026, one sample: 0.41 ppm · Comes from the source
The highest sample, in 2026, was 0.41 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.29 ppm, in 2014.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFPeA | 4.0 ppt | 1 of 4 | None covers it |
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
2 health-based violations since 2016, all for the Lead and Copper Rule. The latest began Jan. 1, 2022, and 1 has no fix on record in EPA’s file.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Lead and Copper Rule | Water chemistry used to keep pipes from corroding was outside the required range.EPA: WQP Entry Point/Tap Treatment Technique Non-Compliance | Jan. 1, 2022 to Dec. 31, 2022 | Resolved |
| Lead and Copper Rule | Lead service lines were not replaced as required.EPA: Lead Service Line Replacement (LSLR) | Nov. 1, 2021 | No fix on recordEPA: addressed |
Health-based violations only. 3 monitoring or reporting violations not shown.
Hardness
Soft, 38 mg/L (2.2 grains per gallon), at its one sampling point, 2016 to 2026.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Andover Water Dept reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2025 sampling for EPA. It also reported ozone.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), nitrate, arsenic and chromium (total) results here are Massachusetts’s own from 2020 on, with EPA’s national file for 2012 to 2019. Andover Water Dept’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 16 to Oct. 1, 2025; Massachusetts’s results run from Jan. 7, 2020 to Sept. 8, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Andover Water Dept’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Massachusetts certifies closest to the area Andover Water Dept serves, or a kit by mail
The 3 labs Massachusetts certifies closest to the area Andover Water Dept serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Eurofins Danvers
Danvers, MA · about 11 miles
Certified for bacteria
New England Chromachem Inc.
Salem, MA · about 16 miles
Certified for organic chemicals, disinfection byproducts, PFAS
Eurofins Derry
Derry, NH · about 18 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Massachusetts certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Massachusetts’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded
- Get the utility’s own reportAndover Water Dept must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Massachusetts Department of Environmental Protection, Drinking Water Program, results from Jan. 2, 2020 to Oct. 5, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: MassDEP Online Searchable Laboratory Certification Listing, potable water, read Oct. 16, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Massachusetts Department of Environmental Protection, Drinking Water Program, results from Jan. 4, 2016 to Jan. 7, 2026, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID MA3009000. Rebuilt from EPA data on Oct. 25, 2026.