Skip to content
TapBuff

Prince Frederick

EPA’s and Maryland’s records have results for 37 contaminants in its water; 5 were found.

Serves 4,371 people · Groundwater · Prince Frederick, MD

Serves
4,371 people
Connections
1,561
Water source
Groundwater
Based in
Prince Frederick, MD
County
Calvert
Owner
Local government
The 3 ZIP codes it serves

20610, 20639, 20678

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for arsenic, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 5 to Aug. 6, 2024.

Arsenic, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), chromium (total) and nitrate: Maryland’s own results, samples taken from Feb. 24, 2020 to Aug. 27, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 5 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 8.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 5.0 ppb · Comes from the source

Averaged by year, the highest was 8.7 ppb, in 2024, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 29.4 ppb. In 2026, the latest year on file, its four samples averaged below the limit. EPA recorded no violation for arsenic at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 7.9 ppb, in 2015.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 13.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 1.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 13.7 ppb, in 2022, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 10.3 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.36 ppm

Highest yearly average, 2021 to 2026 · 2026 average: 0.13 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.36 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.24 ppm, in 2019.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 4.3 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 4.3 ppb, in 2025, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.8 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Chromium (total), Legal limit 100 ppb; highest yearly average 0.33 ppb

Highest yearly average, 2021 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.33 ppb, in 2024, below EPA’s legal limit of 100 ppb. Its highest single sample was 0.65 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
Maryland utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead
  • Nitrate

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Prince Frederick reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Arsenic, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), chromium (total) and nitrate results here are Maryland’s own from 2020 on, with EPA’s national file for 2012 to 2019. Prince Frederick’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 5 to Aug. 6, 2024; Maryland’s results run from Feb. 24, 2020 to Aug. 27, 2026.

Testing your own tap

Prince Frederick’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Maryland certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Prince Frederick’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Maryland certifies closest to the area Prince Frederick serves, or a kit by mail

The 3 labs Maryland certifies closest to the area Prince Frederick serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Home Land Labs - Waldorf

    Waldorf, MD · about 16 miles

    Certified for bacteria, nitrate

    (240) 448-5600

  • Mattawoman Water Quality Lab

    La Plata, MD · about 22 miles

    Certified for bacteria, nitrate

    (301) 609-5612

  • St. Mary's MetCom DW Lab - Lexington Park

    Lexington Park, MD · about 24 miles

    Certified for bacteria

    (301) 737-7400

All 92 certified labs for Maryland⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Maryland certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Maryland’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MD0040011. Rebuilt from EPA data on Oct. 25, 2026.