Skip to content
TapBuff

Fort George G. Meade

EPA’s and Maryland’s records have results for 37 contaminants in its water; 3 were found.

Serves 62,234 people · Groundwater · Fort Meade, MD

Serves
62,234 people
Connections
10,000
Water source
Groundwater
Based in
Fort Meade, MD
County
Anne Arundel
Owner
Federal government
The ZIP code it serves

20755

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 3 to Oct. 3, 2023.

Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), arsenic, chromium (total) and nitrate: Maryland’s own results, samples taken from Jan. 2, 2020 to Aug. 5, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 18.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 14.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 18.1 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 21 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 6.9 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.74 ppm

Highest yearly average, 2020 to 2025 · 2025, one sample: 0.65 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.74 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.75 ppm. In 2025, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.2 ppm, in 2012.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 6.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 3.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 6.7 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 10.1 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Maryland utilities above EPA’s PFAS limits⁠
34 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Fort George G. Meade reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), arsenic, chromium (total) and nitrate results here are Maryland’s own from 2020 on, with EPA’s national file for 2012 to 2019. Fort George G. Meade’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 3 to Oct. 3, 2023; Maryland’s results run from Jan. 2, 2020 to Aug. 5, 2026.

Testing your own tap

Fort George G. Meade’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Maryland certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Fort George G. Meade’s latest lead sampling in EPA’s records, 2019, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Maryland certifies closest to the area Fort George G. Meade serves, or a kit by mail

The 3 labs Maryland certifies closest to the area Fort George G. Meade serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • American Water Laboratory - Fort Meade

    Laurel, MD · about 3 miles

    Certified for bacteria

    (301) 289-7027

  • Howard County Government - Little Patuxent Water Reclamation Plant

    Savage, MD · about 4 miles

    Certified for bacteria

    (410) 313-1210

  • EMSL Analytical, Inc. - Beltsville

    Beltsville, MD · about 9 miles

    Certified for bacteria

    (301) 937-5700

All 92 certified labs for Maryland⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Maryland certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Maryland’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MD0020012. Rebuilt from EPA data on Oct. 25, 2026.