Skip to content
TapBuff

Chapel Hill - Aberdeen Proving Grounds

EPA’s and Maryland’s records have results for 37 contaminants in its water; 4 were found.

Serves 15,000 people · Groundwater · Aberdeen, MD

Serves
15,000 people
Connections
1,712
Water source
Groundwater
Based in
Aberdeen, MD
County
Harford
Owner
Local government
The 2 ZIP codes it serves

21005, 21010

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 9 to Sept. 12, 2023.

Nitrate, fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and chromium (total): Maryland’s own results, samples taken from March 18, 2020 to Sept. 15, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 3.4 ppm

Highest sample; found in 1 of 6 · 2026: not found · Comes from the source

The highest sample, in 2020, was 3.4 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in any of its two samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.7 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.65 ppm

Highest yearly average, 2020 to 2026 · 2026, one sample: 0.63 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.65 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.81 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.54 ppm, in 2017.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 6.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 6.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 6.7 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 19.5 ppb. In 2026, the latest year on file, its 17 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 51.3 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 3.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 2.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 3.5 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 10.1 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 18.4 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Maryland utilities above EPA’s PFAS limits⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Chapel Hill - Aberdeen Proving Grounds reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and chromium (total) results here are Maryland’s own from 2020 on, with EPA’s national file for 2012 to 2019. Chapel Hill - Aberdeen Proving Grounds’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 9 to Sept. 12, 2023; Maryland’s results run from March 18, 2020 to Sept. 15, 2026.

Testing your own tap

Chapel Hill - Aberdeen Proving Grounds’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Maryland certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Chapel Hill - Aberdeen Proving Grounds’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Maryland certifies closest to the area Chapel Hill - Aberdeen Proving Grounds serves, or a kit by mail

The 3 labs Maryland certifies closest to the area Chapel Hill - Aberdeen Proving Grounds serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Community Environmental Laboratories, Inc.

    Aberdeen, MD · about 5 miles

    Certified for bacteria, nitrate, lead and copper

    (410) 273-7600

  • Home Land Labs - Forest Hill

    Forest Hill, MD · about 14 miles

    Certified for bacteria

    (443) 969-1649

  • Caliber Analytical Services, LLC

    Towson, MD · about 19 miles

    Certified for lead and copper, metals, organic chemicals, disinfection byproducts

    (410) 220-5212

All 92 certified labs for Maryland⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Maryland certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Maryland’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MD0120002. Rebuilt from EPA data on Oct. 25, 2026.