Skip to content
TapBuff

St James Water District 2

EPA’s and Louisiana’s records have results for 38 contaminants in its water; 8 were found.

Serves 7,513 people · Surface water · Convent, LA

Serves
7,513 people
Connections
3,565
Water source
Surface water
Based in
Convent, LA
County
St. James Parish
Owner
Local government
The 4 ZIP codes it serves

70090, 70723, 70743, 70763

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 1 health-based violation since 2016, resolved in EPA’s file.

Filters for arsenic and uranium, if you want them lower⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 14 to Nov. 29, 2023.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic, uranium, fluoride and chromium (total): Louisiana’s own results, samples taken from Jan. 9, 2020 to July 9, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. One other PFAS with no federal limit was found, the highest PFBA at 5.5 ppt: see it below.

Below EPA’s limits, 7 results

Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 11 ppb

Highest sample, Nov. 29, 2023; found in 1 of 4 · Comes from the source

The highest sample was 11 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 68.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 60.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 68.8 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 108 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 85.8 ppb, in 2014, and EPA recorded violations in 2014 and 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 48 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 40.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 48 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 88.7 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 48 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 1.5 ppm

Highest sample; found in 7 of 7 · 2026, one sample: 1.5 ppm · Comes from the source

The highest sample, in 2026, was 1.5 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 2.4 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.1 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 0.85 ppb · Comes from the source

Averaged by year, the highest was 1.1 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.9 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.4 ppb, in 2019.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.83 ppb

Highest yearly average, 2020 to 2026 · Comes from the source

Averaged by year, the highest was 0.83 ppb, in 2026, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.8 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.5 ppb, in 2012.

What handles it

About uranium
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.11 ppm

Highest yearly average, 2020 to 2026 · 2026, one sample: 0.1 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.11 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.2 ppm, in 2012.

What handles it

About fluoride
Utilities above EPA’s PFAS limits, state by state⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA5.5 ppt2 of 4None covers it
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

1 health-based violation since 2016 for the Interim Enhanced Surface Water Treatment Rule. It began Feb. 1, 2023.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Interim Enhanced Surface Water Treatment RuleToo many readings in a month showed cloudiness above the filtration standard.EPA: Monthly Turbidity Exceed (Enhanced SWTR)Feb. 1, 2023 to Feb. 28, 2023Resolved

Health-based violations only.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Arsenic, Uranium

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

St James Water District 2 reported adding chloramine before water enters its pipes, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic, uranium, fluoride and chromium (total) results here are Louisiana’s own from 2020 on, with EPA’s national file for 2012 to 2019. St James Water District 2’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 14 to Nov. 29, 2023; Louisiana’s results run from Jan. 9, 2020 to July 9, 2026.

Testing your own tap

St James Water District 2’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Louisiana certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. St James Water District 2’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Louisiana certifies closest to the area St James Water District 2 serves, or a kit by mail

The 3 labs Louisiana certifies closest to the area St James Water District 2 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Curtis Environmental Services, Inc.

    LaPlace, LA · about 22 miles

    Certified for minerals and other inorganics, disinfection byproducts

  • LDH Central Laboratory

    Baton Rouge, LA · about 38 miles

    Certified for bacteria

    (225) 219-5200

  • Water Test, Inc.

    Covington, LA · about 48 miles

    Certified for bacteria

    (985) 892-8329

All 48 certified labs for Louisiana⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Louisiana certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Louisiana’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID LA1093005. Rebuilt from EPA data on Oct. 25, 2026.