Rattlesnake Ridge Water District
EPA’s and Kentucky’s records have results for 38 contaminants in its water; 4 were found.
Serves 11,397 people · Surface water · Grayson, KY
- Serves
- 11,397 people
- Connections
- 4,374
- Water source
- Surface water
- Based in
- Grayson, KY
- County
- Carter
- Owner
- Local government
The short answer
EPA recorded violations of the legal limit for haloacetic acids (HAA5) here in 2020, 2021 and 2025. In 2026, the latest year on file, it averaged 34.3 ppb, below the limit. 5 health-based violations since 2016, all resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from March 26, 2024 to March 3, 2026.
Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, arsenic, chromium (total) and uranium: Kentucky’s own results, samples taken from Feb. 10, 2020 to Aug. 10, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
A legal-limit violation on record, below the limit in the latest year, 1 result
Haloacetic acids (HAA5)
Forms or is added in treatment
What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days.
53.7 ppb
Highest yearly average, 2020 to 2026
2026 average: 34.3 ppb
Averaged by year, the highest was 53.7 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 99 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit. EPA recorded violations for haloacetic acids (HAA5) at this utility in 2020, 2021 and 2025.
How it’s judged
EPA judges this limit at each sampling point, so a violation can be on record in a year whose average is below it.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 56.8 ppb, in 2019.
What handles it
No certification claim covers this compound yet.
Below EPA’s limits, 3 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 54.3 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 42 ppb · Forms or is added in treatment
Averaged by year, the highest was 54.3 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 104 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 42.3 ppb, in 2014.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.95 ppm
Highest yearly average, 2020 to 2026 · 2026 average: 0.82 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.95 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.1 ppm. In 2026, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.85 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Nitrate, Legal limit 10 ppm; highest 0.15 ppm
Highest sample; found in 2 of 6 · 2025: not found · Comes from the source
The highest sample, in 2020, was 0.15 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, it wasn’t found in its one sample.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.27 ppm, in 2016.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
34 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
- Uranium
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
5 health-based violations since 2016, 3 for total Haloacetic Acids (HAA5) and 2 for total organic carbon. The latest began July 1, 2025.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Total Haloacetic Acids (HAA5) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | July 1, 2025 to Sept. 30, 2025, 64 ppb | Resolved |
| April 1, 2021 to June 30, 2021, 67 ppb | Resolved | ||
| April 1, 2020 to June 30, 2020, 62 ppb | Resolved | ||
| Total organic carbon | Not enough organic matter was removed. It reacts with disinfectant to form byproducts.EPA: Treatment Technique Precursor Removal | Jan. 1, 2020 to March 31, 2020 | Resolved |
| Oct. 1, 2019 to Dec. 31, 2019 | Resolved |
Health-based violations only. 5 monitoring or reporting violations not shown.
Disinfectant
Rattlesnake Ridge Water District reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 to 2026 sampling for EPA. It also reported permanganate.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, arsenic, chromium (total) and uranium results here are Kentucky’s own from 2020 on, with EPA’s national file for 2012 to 2019. Rattlesnake Ridge Water District’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 26, 2024 to March 3, 2026; Kentucky’s results run from Feb. 10, 2020 to Aug. 10, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Rattlesnake Ridge Water District’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Rattlesnake Ridge Water District’s results flag: haloacetic acids (HAA5). It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
Labs Kentucky certifies, or a kit by mail
TapBuff hasn’t read Kentucky’s list of certified labs yet. The national page links every state’s own list.
Certified labs, state by stateOr test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Kentucky certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Kentucky’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on haloacetic acids (HAA5)What it does to health, where it comes from, and the certification claim that addresses it.About haloacetic acids (HAA5)
- Get the utility’s own reportRattlesnake Ridge Water District must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Kentucky Division of Water, results from Jan. 2, 2020 to Sept. 23, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID KY0220555. Rebuilt from EPA data on Oct. 25, 2026.
Nearby
- Grayson Utility Commission10,950
- Olive Hill Municipal Water Works6,192
- Sandy Hook Water DistrictElliott County · 11 mi3,528
- Big Sandy Water DistrictBoyd County · 14 mi13,044
- Ashland Water WorksBoyd County · 21 mi44,402
- Paintsville Municipal Water WorksJohnson County · 23 mi24,354