The short answer
None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 2 health-based violations since 2016, 1 with no fix on record in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
Filters for uranium, if you want it lowerThe 2 violationsGot a notice? What it means
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Feb. 21 to Dec. 4, 2023.
Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, uranium, arsenic and chromium (total): Kentucky’s own results, samples taken from Feb. 11, 2020 to Aug. 13, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
58 ppb
Highest sample, Dec. 4, 2023; found in 4 of 4
The highest sample was 58 ppb, about 5.8 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 5 results
Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 27.8 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 24.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 27.8 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 53 ppb. In 2026, the latest year on file, its six samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 23.6 ppb, in 2019.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 13.5 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 10.2 ppb · Forms or is added in treatment
Averaged by year, the highest was 13.5 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 35 ppb. In 2026, the latest year on file, its six samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 29.3 ppb, in 2019.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 1.8 ppm
Highest sample; found in 6 of 7 · 2026: not found · Comes from the source
The highest sample, in 2022, was 1.8 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 1.9 ppm, in 2016.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.24 ppm
Highest yearly average, 2020 to 2026 · 2026 average: 0.23 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.24 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.28 ppm. In 2026, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.0 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.27 ppb
Highest yearly average, 2020 · Comes from the source
Averaged by year, the highest was 0.27 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That is the only year on file.
What handles it
- NSF/ANSI 58 look for “Uranium”
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
2 health-based violations since 2016, 1 for the Stage 1 Disinfectants and Disinfection Byproducts Rule and 1 for the Interim Enhanced Surface Water Treatment Rule. The latest began March 27, 2025, and 1 has no fix on record in EPA’s file.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Stage 1 Disinfectants and Disinfection Byproducts Rule | Treatment was not run by a certified operator as required.EPA: Treatment Technique No Certif. Operator | March 27, 2025 | No fix on recordEPA: unaddressed |
| Interim Enhanced Surface Water Treatment Rule | One cloudiness reading was above the maximum allowed.EPA: Single Turbidity Exceed (Enhanced SWTR) | Dec. 1, 2016 to Dec. 31, 2016 | Resolved |
Health-based violations only. 16 monitoring or reporting violations not shown.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 58
Claim: Uranium
For: Uranium
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.
Compare five-year costsDisinfectant
Benham Water Plant reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, uranium, arsenic and chromium (total) results here are Kentucky’s own from 2020 on, with EPA’s national file for 2012 to 2019. Benham Water Plant’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 21 to Dec. 4, 2023; Kentucky’s results run from Feb. 11, 2020 to Aug. 13, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Benham Water Plant’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Benham Water Plant’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
Labs Kentucky certifies, or a kit by mail
TapBuff hasn’t read Kentucky’s list of certified labs yet. The national page links every state’s own list.
Certified labs, state by stateOr test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Kentucky certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Kentucky’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on lithiumWhat it does to health, where it comes from, and the certification claim that addresses it.About lithium
- Get the utility’s own reportBenham Water Plant must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Kentucky Division of Water, results from Jan. 2, 2020 to Sept. 23, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID KY0480028. Rebuilt from EPA data on Oct. 25, 2026.