Sumner Co RWD 5
What EPA’s and Kansas’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.
- Serves
- 1,429 people
- Connections
- 363
- Water source
- Groundwater
- Based in
- Conway Springs, KS
- County
- Sumner
- Owner
- Local government
- Hardness
- Hard
The short answer
Nothing in EPA’s and Kansas’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.
What was found
Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.6 ppm, for the period ending Dec. 31, 2011. None since is on file, so it is not counted as a current finding.
Nitrate, fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and chromium (total): Kansas’s own results, samples taken from Jan. 29, 2020 to Dec. 16, 2025, with EPA’s 2012 to 2019 file for earlier years.
Below EPA’s limits4
Nitrate
Comes from the source
8.7ppm
Highest sample; found in 8 of 8
2025, one sample: 7.7 ppm
The highest sample, in 2020, was 8.7 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its one sample was 7.7 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 8.6 ppm, in 2015, and EPA recorded violations in 2012, 2013, 2014 and 2015.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Fluoride
Forms or is added in treatment
0.22ppm
Highest yearly average, 2021 to 2024
2024: not found
Averaged by year, the highest was 0.22 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. In 2024, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.18 ppm, in 2018.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Total trihalomethanes (TTHM)
Forms or is added in treatment
1.4ppb
Highest yearly average, 2020 to 2025
2025 average: 0.5 ppb
Averaged by year, the highest was 1.4 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 3.3 ppb. In 2025, the latest year on file, its four samples averaged 0.5 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 3.6 ppb, in 2014.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5)
Forms or is added in treatment
0.82ppb
Highest yearly average, 2020 to 2025
2025 average: 0.65 ppb
Averaged by year, the highest was 0.82 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 3.3 ppb. In 2025, the latest year on file, its four samples averaged 0.65 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.8 ppb, in 2017.
What handles it
No certification claim covers this compound yet.
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
- Arsenic
- Chromium (total)
- Lead
Hardness
Hard, 130 mg/L (7.6 grains per gallon), at its one sampling point, 2015 to 2024.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Violations since 2016
No health-based violations on file with EPA since 2016. There are 12 monitoring or reporting violations: a sample missed, late or not reported.
What this report can’t tell you
Everything else. Nitrate, fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and chromium (total) results here are Kansas’s own from 2020 on, with EPA’s national file for 2012 to 2019. Sumner Co RWD 5’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Kansas’s results run from Jan. 29, 2020 to Dec. 16, 2025.
Testing your own tap
The lab Kansas certifies closest to the area Sumner Co RWD 5 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Meridian Analytical Laboratory - Wichita
Wichita, KS · about 21 miles
Certified for bacteria, nitrate, minerals and other inorganics, organic chemicals, disinfection byproducts
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Kansas Department of Health and Environment, Public Water Supply Section, results from Jan. 2, 2020 to Sept. 16, 2026, read Oct. 18, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Certified labs: Kansas Department of Health and Environment, drinking water labs, as listed in TNI LAMS, read Oct. 13, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Kansas Department of Health and Environment, Public Water Supply Section, results from June 8, 2015 to June 24, 2024, read Oct. 18, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID KS2019101. Rebuilt from EPA data on Oct. 18, 2026.
What to do next
- Nothing here is above a health goalIn EPA’s and Kansas’s records for this utility. They don’t cover everything, which is why the next step matters.Every contaminant TapBuff tracks
- Get the utility’s own reportSumner Co RWD 5 must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded