City of Scranton
What EPA’s and Kansas’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.
- Serves
- 651 people
- Connections
- 280
- Water source
- Surface water bought from another system
- Based in
- Scranton, KS
- County
- Osage
- Owner
- Local government
- Hardness
- Hard
The ZIP code it serves
The short answer
Nothing in EPA’s and Kansas’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.
What was found
Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.5 ppm, for the period ending Dec. 31, 2016. None since is on file, so it is not counted as a current finding.
Total trihalomethanes (TTHM) and haloacetic acids (HAA5): Kansas’s own results, samples taken from Feb. 24, 2020 to Aug. 18, 2026, with EPA’s 2012 to 2019 file for earlier years.
Below EPA’s limits2
Total trihalomethanes (TTHM)
Forms or is added in treatment
39.3ppb
Highest yearly average, 2020 to 2026
Averaged by year, the highest was 39.3 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 48 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 72 ppb, in 2016.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5)
Forms or is added in treatment
24.3ppb
Highest yearly average, 2020 to 2026
2026 average: 21 ppb
Averaged by year, the highest was 24.3 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 33 ppb. In 2026, the latest year on file, its two samples averaged 21 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 21.3 ppb, in 2016.
What handles it
No certification claim covers this compound yet.
One compound tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
- Lead
Hardness
Hard, 160 mg/L (9.4 grains per gallon), at its one sampling point, in 2017.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Violations since 2016
No health-based violations on file with EPA since 2016. There are 10 monitoring or reporting violations: a sample missed, late or not reported.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are Kansas’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Scranton’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Kansas’s results run from Feb. 24, 2020 to Aug. 18, 2026.
Testing your own tap
The 3 labs Kansas certifies closest to the area City of Scranton serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Johnson County Water Quality Laboratory
Olathe, KS · about 46 miles
Certified for bacteria, nitrate, lead and copper
Olathe Environmental Laboratory
Olathe, KS · about 46 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics
Eurofins Kansas City
Lenexa, KS · about 54 miles
Certified for bacteria
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Kansas Department of Health and Environment, Public Water Supply Section, results from Jan. 2, 2020 to Sept. 16, 2026, read Oct. 18, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Certified labs: Kansas Department of Health and Environment, drinking water labs, as listed in TNI LAMS, read Oct. 13, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Kansas Department of Health and Environment, Public Water Supply Section, results from Jan. 18, 2017 to Jan. 18, 2017, read Oct. 18, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID KS2013911. Rebuilt from EPA data on Oct. 18, 2026.
What to do next
- Nothing here is above a health goalIn EPA’s and Kansas’s records for this utility. They don’t cover everything, which is why the next step matters.Every contaminant TapBuff tracks
- Get the utility’s own reportCity of Scranton must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded