Skip to content
TapBuff

City of Pratt

EPA’s and Kansas’s records have results for 37 contaminants in its water; 14 were found.

Serves 6,573 people · Groundwater · Pratt, KS · Hardness: very hard

Serves
6,573 people
Connections
3,527
Water source
Groundwater
Based in
Pratt, KS
County
Pratt
Owner
Local government
Hardness
Very hard
The ZIP code it serves

67124

The short answer

EPA recorded violations of the legal limit for nitrate here in 2024, 2025 and 2026. PFOS had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. Lithium is above EPA’s health benchmark. 8 health-based violations since 2016, none with a fix on record in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 8 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 6 to Sept. 19, 2023.

Lead and copper: EPA SDWIS monitoring periods ending 1998 to 2025.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.6 ppm, for the period ending June 30, 1992. None since is on file, so it is not counted as a current finding.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, fluoride and chromium (total): Kansas’s own results, samples taken from June 22, 2020 to Sept. 8, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFNA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFPeA at 13.9 ppt: see them below.

A legal-limit violation on record, below the limit in the latest year, 1 result

Nitrate

Comes from the source

Violation on record (2026)

What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. A violation like this calls for a notice to customers within 24 hours. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.

13 ppm

Highest sample; found in 95 of 95

2026 average: 8.8 ppm

From 2023 to 2026, 15 samples were above EPA’s legal limit of 10 ppm, the highest 13 ppm in 2025. The next sample at the same point, within 30 days, kept the average above the limit for three; 12 have no follow-up sample on file within 30 days. In 2026, the latest year on file, its 10 samples averaged below the limit. EPA recorded violations for nitrate at this utility in 2024, 2025 and 2026.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 9.7 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOS

Comes from the source

A sample above EPA’s 2029 limit

4.1 ppt

Highest sample, March 7, 2023; found in 1 of 19

The highest sample was 4.1 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 0 ppt, below it.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

20.8 ppb

Highest sample, March 7, 2023; found in 19 of 19

The highest sample was 20.8 ppb, about twice EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 8 results

Arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFNA, EPA’s 2029 limit 10 ppt; highest 6.2 ppt

Highest sample, Sept. 19, 2023; found in 1 of 19 · Comes from the source

The highest sample was 6.2 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFNA
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 36 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 25 ppb · Forms or is added in treatment

Averaged by year, the highest was 36 ppb, in 2023, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 16 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 16 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 13 ppb · Forms or is added in treatment

Averaged by year, the highest was 16 ppb, in 2023, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.1 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.9 ppb

Highest yearly average, 2022 to 2025 · 2025 average: 1.1 ppb · Comes from the source

Averaged by year, the highest was 1.9 ppb, in 2022, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 2.5 ppb. In 2025, the latest year on file, its nine samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.7 ppb, in 2013.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.4 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.17 ppm

Highest yearly average, 2022 to 2025 · 2025 average: 0.12 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.17 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.36 ppm. In 2025, the latest year on file, its nine samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.24 ppm, in 2013.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 2.2 ppb

Highest yearly average, 2022 to 2025 · 2025 average: 0.12 ppb · Comes from the source

Averaged by year, the highest was 2.2 ppb, in 2022, below EPA’s legal limit of 100 ppb. Its highest single sample was 3.4 ppb. In 2025, the latest year on file, its nine samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.1 ppb, in 2013.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 4.4 ppt

Highest sample, March 7, 2023; found in 1 of 19 · Comes from the source

The highest sample was 4.4 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 19 samples, below 4 ppt
PFOS4.0 pptA sample above EPA’s 2029 limit4.1 ppt highest, found in 1 of 19 samples. Details
PFHxS10 pptNot foundNot found in any of 19 samples, below 3 ppt
PFNA10 pptBelow EPA’s limits6.2 ppt highest, found in 1 of 19 samples. Details
HFPO-DA (GenX)10 pptNot foundNot found in any of 19 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits4.4 ppt highest, found in 1 of 19 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Kansas utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA13.9 ppt2 of 19None covers it
PFHxA9.1 ppt2 of 19None covers it
PFBA5.2 ppt1 of 19None covers it
23 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFOA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

8 health-based violations since 2016, all for nitrate. The latest began April 1, 2026, and none has a fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
NitrateA sample was above the legal limit, for a contaminant judged one sample at a time.EPA: Maximum Contaminant Level Violation, Single SampleApril 1, 2026 to June 30, 2026, 12 ppmNo fix on recordEPA: archived
Jan. 1, 2026 to March 31, 2026, 12 ppmNo fix on recordEPA: archived
Oct. 1, 2025 to Dec. 31, 2025, 13 ppmNo fix on recordEPA: archived
July 1, 2025 to Sept. 30, 2025, 12 ppmNo fix on recordEPA: archived
April 1, 2025 to June 30, 2025, 12 ppmNo fix on recordEPA: archived
The other 3, back to 2024
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
NitrateA sample was above the legal limit, for a contaminant judged one sample at a time.EPA: Maximum Contaminant Level Violation, Single SampleJan. 1, 2025 to March 31, 2025, 12 ppmNo fix on recordEPA: archived
Oct. 1, 2024 to Dec. 31, 2024, 12 ppmNo fix on recordEPA: archived
NitrateThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2024 to Dec. 31, 2024, 12 ppmNo fix on recordEPA: archived

Health-based violations only. 1 monitoring or reporting violation not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), PFOS Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Nitrate, PFOS, Arsenic, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Perfluorooctane Sulfonate (PFOS), Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Nitrate, PFOS, Arsenic, Lead

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Very hard, typically 240 mg/L (14 grains per gallon), across 10 sampling points, 2016 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

City of Pratt reported disinfecting with chlorine, not chloramine, at all 10 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, fluoride and chromium (total) results here are Kansas’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Pratt’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 6 to Sept. 19, 2023; Kansas’s results run from June 22, 2020 to Sept. 8, 2026.

Testing your own tap

City of Pratt’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Kansas certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Pratt’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 2.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Pratt’s results flag: nitrate, PFOS and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The lab Kansas certifies closest to the area City of Pratt serves, or a kit by mail

The lab Kansas certifies closest to the area City of Pratt serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Servi-Tech, Inc

    Dodge City, KS · about 70 miles

    Certified for bacteria

    (620) 227-7123

All 47 certified labs for Kansas⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Kansas certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Kansas’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID KS2015103. Rebuilt from EPA data on Oct. 25, 2026.