Skip to content
TapBuff

City of Dodge City

EPA’s and Kansas’s records have results for 38 contaminants in its water; 10 were found.

Serves 27,104 people · Groundwater · Dodge City, KS · Hardness: very hard

Serves
27,104 people
Connections
9,881
Water source
Groundwater
Based in
Dodge City, KS
County
Ford
Owner
Local government
Hardness
Very hard
The ZIP code it serves

67801

The short answer

EPA recorded a violation of the legal limit for nitrate here in 2023. In 2026, the latest year on file, it averaged 6.4 ppm, below the limit. PFOS is above EPA’s new limit, which takes effect in 2029. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 11, 2024 to May 19, 2026.

Nitrate, uranium, fluoride, arsenic, total trihalomethanes (TTHM), haloacetic acids (HAA5) and chromium (total): Kansas’s own results, samples taken from Jan. 20, 2020 to Aug. 11, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. One other PFAS with no federal limit was found, the highest PFPeA at 3.7 ppt: see it below.

A legal-limit violation on record, below the limit in the latest year, 1 result

Nitrate

Comes from the source

Violation on record (2023)

What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. A violation like this calls for a notice to customers within 24 hours. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.

11 ppm

Highest sample; found in 150 of 150

2026 average: 6.4 ppm

From 2023 to 2026, two samples were above EPA’s legal limit of 10 ppm, the highest 11 ppm in 2026. Two have no follow-up sample on file within 30 days. That was also the latest year on file, and its 25 samples averaged below the limit. EPA recorded a violation for nitrate at this utility in 2023.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 21 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Above EPA’s new limit, which takes effect in 2029, 1 result

PFOS

Comes from the source

Above EPA’s new limit (2029)

6.8 ppt

Highest sample, May 18, 2026; found in 2 of 30

The highest sample was 6.8 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 6.7 ppt, also above it.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

166 ppb

Highest sample, March 11, 2024; found in 30 of 30

The highest sample was 166 ppb, about 17 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 6 results

Uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 12.2 ppb

Highest yearly average, 2020 to 2021 · 2021, one sample: 11 ppb · Comes from the source

Averaged by year, the highest was 12.2 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 17 ppb. In 2021, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 13 ppb, in 2013.

What handles it

About uranium
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.5 ppm

Highest yearly average, 2021 to 2025 · 2025 average: 1.4 ppm · Forms or is added in treatment

Averaged by year, the highest was 1.5 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 2.9 ppm. In 2025, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.3 ppm, in 2016.

What handles it

About fluoride
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 3.3 ppb

Highest yearly average, 2021 to 2025 · 2025 average: 2.3 ppb · Comes from the source

Averaged by year, the highest was 3.3 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 3.9 ppb. In 2025, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.4 ppb, in 2019.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 7.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 2.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 7.7 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 75 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 11.8 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 1.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 0.88 ppb · Forms or is added in treatment

Averaged by year, the highest was 1.6 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 15 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.3 ppb, in 2016.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Chromium (total), Legal limit 100 ppb; highest yearly average 1.6 ppb

Highest yearly average, 2021 to 2025 · 2025 average: 0.78 ppb · Comes from the source

Averaged by year, the highest was 1.6 ppb, in 2021, below EPA’s legal limit of 100 ppb. Its highest single sample was 3.2 ppb. In 2025, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 4.5 ppb, in 2018.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 30 samples, below 4 ppt
PFOS4.0 pptAbove EPA’s new limit (2029)6.8 ppt highest, found in 2 of 30 samples. Details
PFHxS10 pptNot foundNot found in any of 30 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 30 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 30 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 30 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Kansas utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA3.7 ppt3 of 30None covers it
28 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), PFOS Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, PFOS, Arsenic

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Perfluorooctane Sulfonate (PFOS), Uranium, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, PFOS, Uranium, Arsenic

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for PFAS, ranked⁠

Hardness

Very hard, typically 310 mg/L (18.1 grains per gallon), across 15 sampling points, 2015 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

City of Dodge City reported disinfecting with chlorine, not chloramine, at all 15 of its sampling points, in its 2024 to 2026 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

1 health-based violation since 2016 for nitrate. It began Jan. 1, 2023.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
NitrateThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2023 to Dec. 31, 2023, 11 ppmResolved

Health-based violations only. 3 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, uranium, fluoride, arsenic, total trihalomethanes (TTHM), haloacetic acids (HAA5) and chromium (total) results here are Kansas’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Dodge City’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 11, 2024 to May 19, 2026; Kansas’s results run from Jan. 20, 2020 to Aug. 11, 2026.

Testing your own tap

City of Dodge City’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Kansas certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Dodge City’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Dodge City’s results flag: nitrate, PFOS and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The lab Kansas certifies closest to the area City of Dodge City serves, or a kit by mail

The lab Kansas certifies closest to the area City of Dodge City serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Servi-Tech, Inc

    Dodge City, KS · under a mile

    Certified for bacteria

    (620) 227-7123

All 47 certified labs for Kansas⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Kansas certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Kansas’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID KS2005710. Rebuilt from EPA data on Oct. 25, 2026.