City of Bonner Springs
EPA’s and Kansas’s records have results for 38 contaminants in its water; 7 were found.
Serves 7,805 people · Groundwater bought from another system · Bonner Springs, KS · Hardness: varies by source
- Serves
- 7,805 people
- Connections
- 2,872
- Water source
- Groundwater bought from another system
- Based in
- Bonner Springs, KS
- County
- Wyandotte
- Owner
- Local government
- Hardness
- Varies by source
The ZIP code it serves
The short answer
Copper is above the action level in the latest monitoring period, ending June 30, 2023. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Feb. 14 to Aug. 7, 2024.
Lead and copper: EPA SDWIS monitoring periods ending 2019 to 2023.
Arsenic, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, chromium (total) and nitrate: Kansas’s own results, samples taken from Jan. 15, 2020 to Aug. 26, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above the legal limit, 1 result
Copper
Comes from pipes, often your own
What it means for you. EPA’s concern is stomach and intestinal distress from short-term exposure, and liver or kidney damage over years. A filter certified for it, at the tap you drink from, reduces it.
1.5 ppm
90th percentile, 2023
In the latest period, 9 in 10 homes sampled were at or below 1.5 ppm, above EPA’s action level of 1.3 ppm.
What handles it
- NSF/ANSI 53 look for “Copper Reduction”
- NSF/ANSI 58 look for “Copper Reduction”
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
15 ppb
Highest sample, Feb. 14, 2024; found in 2 of 2
The highest sample was 15 ppb, above EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 5 results
Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 4.4 ppb
Highest yearly average, 2020 to 2025 · 2025, one sample: 1.4 ppb · Comes from the source
Averaged by year, the highest was 4.4 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2025, the latest year on file, its one sample was below the limit.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 33.9 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 31.8 ppb · Forms or is added in treatment
Averaged by year, the highest was 33.9 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 57 ppb. In 2026, the latest year on file, its six samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 53 ppb, in 2018.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 24.8 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 15.9 ppb · Forms or is added in treatment
Averaged by year, the highest was 24.8 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 44 ppb. In 2026, the latest year on file, its six samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 33 ppb, in 2018.
What handles it
No certification claim covers this compound yet.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.79 ppm
Highest yearly average, 2020 to 2026 · 2026 average: 0.45 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.79 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.7 ppm. In 2026, the latest year on file, its three samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Chromium (total), Legal limit 100 ppb; highest yearly average 2.7 ppb
Highest yearly average, 2020 to 2025 · 2025: not found · Comes from the source
Averaged by year, the highest was 2.7 ppb, in 2020, below EPA’s legal limit of 100 ppb. In 2025, the latest year on file, it wasn’t found in its one sample.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Lead
- Nitrate
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claims: Copper Reduction, Arsenic (Pentavalent)<=50 ppb Reduction
For: Copper, Arsenic
Other claims that cover it: Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Copper Reduction, Arsenic (Pentavalent)<=50 ppb Reduction
For: Copper, Arsenic
Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Under-sink reverse osmosis
Five years: $549, household of 3, cartridges included
WQA listing: NSF/ANSI 58, checked Oct. 9, 2026
Certified for: Copper; also arsenic, found below its limits
Brita Tahoe Pitcher with Original Filter (OB60, OB03)
Pitcher
Five years: $1,124, household of 3, cartridges included
Certified for: Copper
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Copper; also arsenic, found below its limits
2 more filters
Brondell Capella RC250 Reverse Osmosis System
Under-sink reverse osmosis
Five years: $1,950, household of 3, cartridges included
Certified for: Copper; also arsenic, found below its limits
LifeStraw Home 7-Cup Glass Water Filter Pitcher
Pitcher
Five years: $2,869, household of 3, cartridges included
Certified for: Copper
Hardness
Moderately hard to very hard depending on the source, 120 to 470 mg/L (7 to 27.5 grains per gallon), across 3 sampling points, 2017 to 2025.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
City of Bonner Springs reported adding chloramine before water enters its pipes, at its one sampling point, in its 2024 sampling for EPA.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. There are 8 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Arsenic, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, chromium (total) and nitrate results here are Kansas’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Bonner Springs’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 14 to Aug. 7, 2024; Kansas’s results run from Jan. 15, 2020 to Aug. 26, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Bonner Springs’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What City of Bonner Springs’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Kansas certifies closest to the area City of Bonner Springs serves, or a kit by mail
The 3 labs Kansas certifies closest to the area City of Bonner Springs serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Water District No 1 of Johnson County-WaterOne
Kansas City, KS · about 12 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics
Eurofins Kansas City
Lenexa, KS · about 12 miles
Certified for bacteria
Microbac Laboratories, Inc - Kansas
Lenexa, KS · about 12 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Kansas certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Kansas’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 2 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with copper
- Get the utility’s own reportCity of Bonner Springs must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Kansas Department of Health and Environment, Public Water Supply Section, results from Jan. 2, 2020 to Sept. 16, 2026, read Oct. 18, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Kansas Department of Health and Environment, drinking water labs, as listed in TNI LAMS, read Oct. 13, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Kansas Department of Health and Environment, Public Water Supply Section, results from Jan. 11, 2017 to Jan. 9, 2025, read Oct. 18, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID KS2020904. Rebuilt from EPA data on Oct. 25, 2026.