Skip to content
TapBuff
ZIP

Barton Hills Addition

What EPA’s and Kansas’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
176 people
Connections
57
Water source
Groundwater
Based in
Great Bend, KS
County
Barton
Owner
Private
Hardness
Very hard
The ZIP code it serves

67530

The short answer

1 result is above the health goal. The worst: Lead, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2012 to 2022.

Nitrate, fluoride, chromium (total), arsenic, haloacetic acids (HAA5) and total trihalomethanes (TTHM): Kansas’s own results, samples taken from Sept. 8, 2020 to May 5, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal1

Lead

Comes from pipes, often your own

Above the health goal

1.6ppb

90th percentile, 2020 to 2022

In the latest period, 9 in 10 homes sampled were at or below 1.6 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits3

Nitrate

Comes from the source

Below EPA’s limits

4.8ppm

Highest sample; found in 25 of 25

2025 average: 3.7 ppm

The highest sample, in 2020, was 4.8 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its five samples averaged 3.7 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 3.7 ppm, in 2014.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.3ppm

Highest yearly average, 2021 to 2024

2024 average: 0.27 ppm

Averaged by year, the highest was 0.3 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.31 ppm. In 2024, the latest year on file, its two samples averaged 0.27 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.34 ppm, in 2012.

What handles it

Chromium (total)

Comes from the source

Below EPA’s limits

1.8ppb

Highest yearly average, 2021 to 2024

2024 average: 1.1 ppb

Averaged by year, the highest was 1.8 ppb, in 2021, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.9 ppb. In 2024, the latest year on file, its two samples averaged 1.1 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 4.1 ppb, in 2018.

What handles it

3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Haloacetic acids (HAA5)
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Hardness

Very hard, typically 455 mg/L (26.6 grains per gallon), across 3 sampling points, 2015 to 2024.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared at 26.6 grains per gallon, salt includedSoftener or salt-free conditioner?Kansas water hardness, utility by utility

Violations since 2016

No health-based violations on file with EPA since 2016. There are 29 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Nitrate, fluoride, chromium (total), arsenic, haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Kansas’s own from 2020 on, with EPA’s national file for 2012 to 2019. Barton Hills Addition’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Kansas’s results run from Sept. 8, 2020 to May 5, 2026.

Testing your own tap

Barton Hills Addition’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Kansas certifies.

The lab Kansas certifies closest to the area Barton Hills Addition serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Pace Analytical Services, Inc. - Salina

    Salina, KS · about 70 miles

    Certified for bacteria, nitrate

    (913) 599-5665

All 47 certified labs for Kansas

Sources

PWSID KS2000915. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Barton County

All Kansas utilities

What to do next