Skip to content
TapBuff

West Point Muni Water System

What EPA’s and Iowa’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
921 people
Connections
504
Water source
Surface water bought from another system
Based in
West Point, IA
County
Lee
Owner
Local government
The ZIP code it serves

52656

The short answer

Nothing in EPA’s and Iowa’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): Iowa’s own results, samples taken from July 20, 2020 to July 14, 2025, with EPA’s 2012 to 2019 file for earlier years.

Below EPA’s limits1

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

17ppb

Highest yearly average, 2020 to 2025

Averaged by year, the highest was 17 ppb, in 2025, below EPA’s legal limit of 80 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 13 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Haloacetic acids (HAA5)
  • Lead

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are Iowa’s own from 2020 on, with EPA’s national file for 2012 to 2019. West Point Muni Water System’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Iowa’s results run from July 20, 2020 to July 14, 2025.

Testing your own tap

West Point Muni Water System’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Iowa certifies.

The 3 labs Iowa certifies closest to the area West Point Muni Water System serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Ion Environmental Solutions

    Muscatine, IA · about 52 miles

    Certified for bacteria, nitrate

    (563) 299-2214

  • State Hygienic Laboratory - Coralville

    Coralville, IA · about 67 miles

    Certified for bacteria, nitrate, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (319) 335-4500

  • Quad Cities Metallurgical Laboratory

    Davenport, IA · about 73 miles

    Certified for bacteria, nitrate

    (563) 386-7827

State Hygienic Laboratory at the University of Iowa: Through the Grants-to-Counties program, private well owners in participating counties can have their water tested for total coliform bacteria and nitrate. Start with the county sanitarian at your county health department. No cost in a participating county. The Grants-to-Counties Program, State Hygienic Lab at the University of Iowa.

All 36 certified labs for Iowa

Sources

PWSID IA5691012. Rebuilt from EPA data on Oct. 18, 2026.