Skip to content
TapBuff

Norwalk Water Supply

EPA’s and Iowa’s records have results for 33 contaminants in its water; 3 were found.

Serves 14,334 people · Surface water bought from another system · Norwalk, IA

Serves
14,334 people
Connections
5,982
Water source
Surface water bought from another system
Based in
Norwalk, IA
County
Warren
Owner
Local government
The 2 ZIP codes it serves

50061, 50211

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 14 to Nov. 6, 2023.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): Iowa’s own results, samples taken from Jan. 21, 2020 to July 29, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

47.6 ppb

Highest sample, Aug. 9, 2023; found in 3 of 4

The highest sample was 47.6 ppb, about 4.8 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 2 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 70.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 48 ppb · Forms or is added in treatment

Averaged by year, the highest was 70.5 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 110 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 64.6 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 11.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 7.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 11.6 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 18 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 13 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Utilities above EPA’s PFAS limits, state by state⁠
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Norwalk Water Supply reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are Iowa’s own from 2020 on, with EPA’s national file for 2012 to 2019. Norwalk Water Supply’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 14 to Nov. 6, 2023; Iowa’s results run from Jan. 21, 2020 to July 29, 2026.

Testing your own tap

Norwalk Water Supply’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Iowa certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Norwalk Water Supply’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Norwalk Water Supply’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Iowa certifies closest to the area Norwalk Water Supply serves, or a kit by mail

The 3 labs Iowa certifies closest to the area Norwalk Water Supply serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • State Hygienic Laboratory - Ankeny

    Ankeny, IA · about 19 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (515) 725-1600

  • Microbac Laboratories - Newton

    Newton, IA · about 40 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (641) 792-8451

  • AgSource

    Ellsworth, IA · about 60 miles

    Certified for bacteria, nitrate, metals, minerals and other inorganics

    (515) 297-8103

All 36 certified labs for Iowa⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Iowa certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Iowa’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID IA9164078. Rebuilt from EPA data on Oct. 25, 2026.