Skip to content
TapBuff

Mahaska Rural Water System, Inc.

EPA’s and Iowa’s records have results for 37 contaminants in its water; 5 were found.

Serves 11,325 people · Groundwater · Oskaloosa, IA

Serves
11,325 people
Connections
4,530
Water source
Groundwater
Based in
Oskaloosa, IA
County
Mahaska
Owner
Private
The 2 ZIP codes it serves

52534, 52577

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 1 health-based violation since 2016, resolved in EPA’s file.

The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 15 to Oct. 14, 2025.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, chromium (total) and arsenic: Iowa’s own results, samples taken from Jan. 7, 2020 to Sept. 1, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 55.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 17.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 55.3 ppb, in 2025, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 42 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 25.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 20.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 25.5 ppb, in 2025, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 23.6 ppb, in 2016.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.88 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.72 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.88 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.0 ppm. In 2026, the latest year on file, its nine samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.86 ppm, in 2019.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.7 ppm

Highest sample; found in 7 of 7 · 2026, one sample: 0.3 ppm · Comes from the source

The highest sample, in 2022, was 0.7 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.7 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 2.4 ppb

Highest yearly average, 2020 · Comes from the source

Averaged by year, the highest was 2.4 ppb, in 2020, below EPA’s legal limit of 100 ppb. That is the only year on file.

What handles it

About chromium (total)
Utilities above EPA’s PFAS limits, state by state⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

1 health-based violation since 2016 for the Revised Total Coliform Rule. It began April 1, 2016.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)April 1, 2016Resolved

Health-based violations only.

Disinfectant

Mahaska Rural Water System, Inc. reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, chromium (total) and arsenic results here are Iowa’s own from 2020 on, with EPA’s national file for 2012 to 2019. Mahaska Rural Water System, Inc.’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 15 to Oct. 14, 2025; Iowa’s results run from Jan. 7, 2020 to Sept. 1, 2026.

Testing your own tap

Mahaska Rural Water System, Inc.’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Iowa certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Mahaska Rural Water System, Inc.’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Iowa certifies closest to the area Mahaska Rural Water System, Inc. serves, or a kit by mail

The 3 labs Iowa certifies closest to the area Mahaska Rural Water System, Inc. serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Microbac Laboratories - Newton

    Newton, IA · about 36 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (641) 792-8451

  • Microbac Laboratories - Centerville

    Centerville, IA · about 41 miles

    Certified for bacteria

    (641) 437-7023

  • State Hygienic Laboratory - Ankeny

    Ankeny, IA · about 59 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (515) 725-1600

All 36 certified labs for Iowa⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Iowa certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Iowa’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID IA6273901. Rebuilt from EPA data on Oct. 25, 2026.