Skip to content
TapBuff

Clermont Water Supply

EPA’s and Iowa’s records have results for 38 contaminants in its water; 6 were found.

Serves 586 people · Groundwater · Clermont, IA

Serves
586 people
Connections
316
Water source
Groundwater
Based in
Clermont, IA
County
Fayette
Owner
Local government
The ZIP code it serves

52135

The short answer

Copper is above the action level in the latest monitoring period, ending Dec. 31, 2020. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from May 8 to Nov. 6, 2023.

Lead and copper: EPA SDWIS monitoring periods ending 1993 to 2020.

Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), fluoride, arsenic and chromium (total): Iowa’s own results, samples taken from June 23, 2020 to Aug. 11, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above the legal limit, 1 result

Copper

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s concern is stomach and intestinal distress from short-term exposure, and liver or kidney damage over years. A filter certified for it, at the tap you drink from, reduces it.

1.4 ppm

90th percentile, 2018 to 2020

In the latest period, 9 in 10 homes sampled were at or below 1.4 ppm, above EPA’s action level of 1.3 ppm.

What handles it

Below EPA’s limits, 5 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Lead, Action level 15 ppb · health goal zero; 90th percentile 6.8 ppb

90th percentile, 2023 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 6.8 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 33.9 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 11.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 33.9 ppb, in 2024, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 23.8 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 3.3 ppm

Highest sample; found in 7 of 7 · 2026, one sample: 3.0 ppm · Comes from the source

The highest sample, in 2021, was 3.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 5.9 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 15.4 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 6.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 15.4 ppb, in 2020, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 17.9 ppb, in 2016.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.1 ppm

Highest yearly average, 2020 · Forms or is added in treatment

Averaged by year, the highest was 0.1 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

About fluoride
Utilities above EPA’s PFAS limits, state by state⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Copper Reduction, Lead Reduction

    For: Copper, Lead

  • NSF/ANSI 58

    Claims: Copper Reduction, Lead Reduction

    For: Copper, Lead

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

Clermont Water Supply reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), fluoride, arsenic and chromium (total) results here are Iowa’s own from 2020 on, with EPA’s national file for 2012 to 2019. Clermont Water Supply’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 8 to Nov. 6, 2023; Iowa’s results run from June 23, 2020 to Aug. 11, 2026.

Testing your own tap

Clermont Water Supply’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Iowa certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Clermont Water Supply’s latest lead sampling in EPA’s records, 2023, had a 90th percentile of 6.8 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Iowa certifies closest to the area Clermont Water Supply serves, or a kit by mail

The 3 labs Iowa certifies closest to the area Clermont Water Supply serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Eurofins - Cedar Falls

    Cedar Falls, IA · about 53 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (319) 277-2401

  • Microbac Laboratories - Waterloo

    Waterloo, IA · about 54 miles

    Certified for bacteria, nitrate

    (319) 235-4440

  • Dubuque County Health Department

    Dubuque, IA · about 56 miles

    Certified for bacteria

    (563) 557-7396

All 36 certified labs for Iowa⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Iowa certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Iowa’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID IA3317047. Rebuilt from EPA data on Oct. 25, 2026.