Chain Ridge Subdivision

What EPA’s and Iowa’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves: 25 people
Connections: 10
Water source: Groundwater
Based in: Solon, IA
County: Johnson
Owner: Private

The short answer

Nothing in EPA’s and Iowa’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Nitrate: Iowa’s own results, samples taken from March 17, 2020 to Feb. 9, 2026.

Fluoride, arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from June 23, 2019 to June 23, 2019. Newer results are in the utility’s annual water quality report.

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

0.53ppm

Highest sample; found in 6 of 7

2026, one sample: 0.3 ppm

The highest sample, in 2023, was 0.53 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was 0.3 ppm.

What handles it

NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.2ppm

Highest yearly average, 2019

Averaged by year, the highest was 0.2 ppm, in 2019, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

NSF/ANSI 58 look for “Fluoride Reduction”
NSF/ANSI 53 look for “Fluoride”

3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

Arsenic
Chromium (total)
Lead

Violations since 2016

No health-based violations on file with EPA since 2016.

What this report can’t tell you

Everything else. Nitrate results here are Iowa’s own from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride, arsenic and chromium (total) come from EPA’s file alone, which ends in 2019. Chain Ridge Subdivision’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Iowa’s results run from March 17, 2020 to Feb. 9, 2026; EPA’s compliance samples are from June 23, 2019 to June 23, 2019.

Testing your own tap

Chain Ridge Subdivision’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Iowa certifies.

No lab Iowa certifies is within 75 miles of the area Chain Ridge Subdivision serves on the state’s list. Some take samples by mail; the state’s page lists them all.

State Hygienic Laboratory at the University of Iowa: Through the Grants-to-Counties program, private well owners in participating counties can have their water tested for total coliform bacteria and nitrate. Start with the county sanitarian at your county health department. No cost in a participating county. The Grants-to-Counties Program, State Hygienic Lab at the University of Iowa.

All 36 certified labs for Iowa