Skip to content
TapBuff

Amana Society Water System North

What EPA’s and Iowa’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
1,248 people
Connections
663
Water source
Groundwater
Based in
Middle Amana, IA
County
Iowa
Owner
Private
The 2 ZIP codes it serves

52203, 52307

The short answer

1 result is above EPA’s legal limit. The worst: Copper, above the action level. 1 health-based violation since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2019 to 2021.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic and chromium (total): Iowa’s own results, samples taken from March 26, 2020 to Aug. 24, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the legal limit1

Copper

Comes from pipes, often your own

Above the action level

1.7ppm

90th percentile, 2021

In the latest period, 9 in 10 homes sampled were at or below 1.7 ppm, above EPA’s action level of 1.3 ppm.

What handles it

Below EPA’s limits4

Nitrate

Comes from the source

Below EPA’s limits

8.2ppm

Highest sample; found in 28 of 33

2026, one sample: 3.7 ppm

The highest sample, in 2020, was 8.2 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was 3.7 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 12 ppm, in 2019, and EPA recorded a violation in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

21.5ppb

Highest yearly average, 2020 to 2026

2026 average: 15 ppb

Averaged by year, the highest was 21.5 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 22 ppb. In 2026, the latest year on file, its two samples averaged 15 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 23 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

7.5ppb

Highest yearly average, 2020 to 2026

2026 average: 3.5 ppb

Averaged by year, the highest was 7.5 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 9.0 ppb. In 2026, the latest year on file, its two samples averaged 3.5 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 7.5 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.46ppm

Highest yearly average, 2022

Averaged by year, the highest was 0.46 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
NitrateA sample was above the legal limit, for a contaminant judged one sample at a time.EPA: Maximum Contaminant Level Violation, Single SampleNov. 1, 2019 to Nov. 30, 201912 MG/LResolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 5 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic and chromium (total) results here are Iowa’s own from 2020 on, with EPA’s national file for 2012 to 2019. Amana Society Water System North’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Iowa’s results run from March 26, 2020 to Aug. 24, 2026.

Testing your own tap

Amana Society Water System North’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Iowa certifies.

The 3 labs Iowa certifies closest to the area Amana Society Water System North serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Linn County Public Health Department

    Cedar Rapids, IA · about 17 miles

    Certified for bacteria, nitrate

    (319) 892-6000

  • State Hygienic Laboratory - Coralville

    Coralville, IA · about 17 miles

    Certified for bacteria, nitrate, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (319) 335-4500

  • Microbac Laboratories - Waterloo

    Waterloo, IA · about 48 miles

    Certified for bacteria, nitrate

    (319) 235-4440

State Hygienic Laboratory at the University of Iowa: Through the Grants-to-Counties program, private well owners in participating counties can have their water tested for total coliform bacteria and nitrate. Start with the county sanitarian at your county health department. No cost in a participating county. The Grants-to-Counties Program, State Hygienic Lab at the University of Iowa.

All 36 certified labs for Iowa

Sources

PWSID IA4848001. Rebuilt from EPA data on Oct. 18, 2026.