Skip to content
TapBuff
ZIP

Troy Water Utility

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
1,223 people
Connections
489
Water source
Groundwater
Based in
Troy, IN
County
Perry
Owner
Local government
The ZIP code it serves

47588

The short answer

Nothing in EPA’s and CDC’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. 1 health-based violation since 2016.

What was found

Total trihalomethanes (TTHM), nitrate and haloacetic acids (HAA5): Indiana’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2022 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride, arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from Aug. 15, 2012 to June 6, 2018. Newer results are in the utility’s annual water quality report.

Below EPA’s limits4

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

49ppb

Highest yearly average, 2022 to 2023

Averaged by year, the highest was 49 ppb, in 2023, below EPA’s legal limit of 80 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 3.5 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Nitrate

Comes from the source

Below EPA’s limits

1.9ppm

Highest yearly average, 2022 to 2023

2023: not found

Averaged by year, the highest was 1.9 ppm, in 2022, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it wasn’t found. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 3.4 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.2ppm

Highest yearly average, 2012 to 2018

2018, one sample: 0.17 ppm

Averaged by year, the highest was 0.2 ppm, in 2015, below EPA’s legal limit of 4.0 ppm. In 2018, the latest year on file, its one sample was 0.17 ppm.

What handles it

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

2.1ppb

Highest yearly average, 2022 to 2023

2023: not found

Averaged by year, the highest was 2.1 ppb, in 2022, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it wasn’t found. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 15 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Stage 1 Disinfectants and Disinfection Byproducts RuleTreatment was not run by a certified operator as required.EPA: Treatment Technique No Certif. OperatorFeb. 3, 2023—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 7 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate and haloacetic acids (HAA5) results here are Indiana’s yearly averages as CDC publishes them, from 2022 on, with EPA’s national file for 2012 to 2019. Fluoride, arsenic and chromium (total) come from EPA’s file alone, which ends in 2019. Troy Water Utility’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for Indiana cover 2022 to 2023; EPA’s compliance samples are from Aug. 15, 2012 to June 6, 2018.

Testing your own tap

Troy Water Utility’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Indiana certifies.

The 3 labs Indiana certifies closest to the area Troy Water Utility serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

Indiana Department of Health laboratory: Test kits for well water: nitrate, fluoride, and arsenic, lead and copper, ordered from the lab and returned by mail. They are open to the public. Nitrate is $10 a sample plus $6.50 shipping per order, fluoride $10 plus shipping, and the arsenic, lead and copper kit $20 plus $6.50 shipping. Water Testing, Indiana Department of Health.

All 81 certified labs for Indiana

Sources

PWSID IN5262005. Rebuilt from EPA data on Oct. 18, 2026.

Also in Perry County

All Indiana utilities

What to do next