Skip to content
TapBuff
ZIP

Pennville Water Company

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
706 people
Connections
265
Water source
Groundwater
Based in
Pennville, IN
County
Jay
Owner
Local government
The ZIP code it serves

47369

The short answer

1 result is above the health goal. The worst: Lead, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 1996 to 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5) and nitrate: Indiana’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2022 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride, arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from Dec. 7, 2012 to Dec. 14, 2018. Newer results are in the utility’s annual water quality report.

Above the health goal1

Lead

Comes from pipes, often your own

Above the health goal

1.1ppb

90th percentile, 2022 to 2024

In the latest period, 9 in 10 homes sampled were at or below 1.1 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits3

Fluoride

Forms or is added in treatment

Below EPA’s limits

1.0ppm

Highest yearly average, 2012 to 2018

2018, one sample: 1.0 ppm

Averaged by year, the highest was 1.0 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. In 2018, the latest year on file, its one sample was 1.0 ppm.

What handles it

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

17.9ppb

Highest yearly average, 2022 to 2023

Averaged by year, the highest was 17.9 ppb, in 2023, below EPA’s legal limit of 80 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 37.3 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

6.4ppb

Highest yearly average, 2022 to 2023

Averaged by year, the highest was 6.4 ppb, in 2023, below EPA’s legal limit of 60 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 20.1 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Nitrate

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5) and nitrate results here are Indiana’s yearly averages as CDC publishes them, from 2022 on, with EPA’s national file for 2012 to 2019. Fluoride, arsenic and chromium (total) come from EPA’s file alone, which ends in 2019. Pennville Water Company’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for Indiana cover 2022 to 2023; EPA’s compliance samples are from Dec. 7, 2012 to Dec. 14, 2018.

Testing your own tap

Pennville Water Company’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Indiana certifies.

The 3 labs Indiana certifies closest to the area Pennville Water Company serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

Indiana Department of Health laboratory: Test kits for well water: nitrate, fluoride, and arsenic, lead and copper, ordered from the lab and returned by mail. They are open to the public. Nitrate is $10 a sample plus $6.50 shipping per order, fluoride $10 plus shipping, and the arsenic, lead and copper kit $20 plus $6.50 shipping. Water Testing, Indiana Department of Health.

All 81 certified labs for Indiana

Sources

PWSID IN5238006. Rebuilt from EPA data on Oct. 18, 2026.

Nearby

All Indiana utilities

What to do next