Skip to content
TapBuff

New Pekin Water Utility

EPA’s and Indiana’s records have results for 33 contaminants in its water; 3 were found.

Serves 2,150 people · Surface water bought from another system · Salem, IN

Serves
2,150 people
Connections
860
Water source
Surface water bought from another system
Based in
Salem, IN
County
Washington
Owner
Local government
The 2 ZIP codes it serves

47165, 47167

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 3 health-based violations since 2016, all resolved in EPA’s file.

The 3 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 20 to Nov. 6, 2023.

Haloacetic acids (HAA5) and total trihalomethanes (TTHM): Indiana’s own results, samples taken from Feb. 5, 2020 to Aug. 4, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. One other PFAS with no federal limit was found, the highest PFBA at 22.3 ppt: see it below.

Below EPA’s limits, 2 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 44.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 37.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 44.8 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 61.4 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 50.3 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 54.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 49.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 54.6 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 87 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 89.6 ppb, in 2015, and EPA recorded violations in 2015 and 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Indiana utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA22.3 ppt2 of 4None covers it
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

3 health-based violations since 2016, all for TTHM. The latest began July 1, 2016.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2016 to Sept. 30, 2016, 82.8 ppbResolved
April 1, 2016 to June 30, 2016, 92.8 ppbResolved
Jan. 1, 2016 to March 31, 2016, 98.5 ppbResolved

Health-based violations only. 1 monitoring or reporting violation not shown.

Disinfectant

New Pekin Water Utility reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Indiana’s own from 2020 on, with EPA’s national file for 2012 to 2019. New Pekin Water Utility’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 20 to Nov. 6, 2023; Indiana’s results run from Feb. 5, 2020 to Aug. 4, 2026.

Testing your own tap

New Pekin Water Utility’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Indiana certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. New Pekin Water Utility’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Indiana certifies closest to the area New Pekin Water Utility serves, or a kit by mail

The 3 labs Indiana certifies closest to the area New Pekin Water Utility serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Astbury Water Technology, Inc.-Clarksville

    Clarksville, IN · about 23 miles

    Certified for bacteria

    (812) 282-8481Website: Astbury Water Technology, Inc.-Clarksville

  • Microbac Laboratories, Inc.-KTL

    Louisville, KY · about 32 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (502) 962-6400

  • Beckmar Environmental Laboratory

    Louisville, KY · about 40 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (502) 266-6533

All 81 certified labs for Indiana⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Indiana certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Indiana’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID IN5288004. Rebuilt from EPA data on Oct. 25, 2026.