Skip to content
TapBuff

MDWASA - Main System

EPA’s and Florida’s records have results for 38 contaminants in its water; 19 were found.

Serves 2.4 million people · Groundwater · Miami, FL

Serves
2.4 million people
Connections
560,000
Water source
Groundwater
Based in
Miami, FL
County
Miami - Dade
Owner
Local government
The 60 ZIP codes it serves

33014, 33015, 33016, 33018, 33023, 33031, 33032, 33033, 33034, 33054, 33055, 33056, 33101, 33109, 33116, 33122, 33125, 33126, 33127, 33128, 33129, 33130, 33131, 33132, 33133, 33134, 33135, 33136, 33137, 33138, 33139, 33140, 33141, 33142, 33143, 33144, 33145, 33146, 33147, 33149, 33150, 33151, 33152, 33153, 33154, 33155, 33156, 33157, 33158, 33160, 33161, 33162, 33165, 33166, 33167, 33168, 33169, 33170, 33172, 33173

The short answer

None of the results here is above a limit in force today. PFOS and PFOA are above EPA’s new limit, which takes effect in 2029. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Nov. 8, 2023 to May 15, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2014 to 2023.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic, fluoride, nitrate, uranium and chromium (total): Florida’s own results, samples taken from Jan. 6, 2020 to Dec. 23, 2024, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOS, PFOA, PFHxS, PFNA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Six other PFAS with no federal limit were found, the highest 6:2 FTS at 190 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOS

Comes from the source

Above EPA’s new limit (2029)

33 ppt

Highest sample, Dec. 20, 2023; found in 6 of 8

The highest sample was 33 ppt, about 8.3 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 31.4 ppt, also above it.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

14 ppt

Highest sample, Dec. 20, 2023; found in 6 of 8

The highest sample was 14 ppt, about 3.5 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 12.3 ppt, also above it.

What handles it

Below EPA’s limits, 11 results

Lead, arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFHxS, EPA’s 2029 limit 10 ppt; highest 9.4 ppt

Highest sample, Dec. 20, 2023; found in 3 of 8 · Comes from the source

The highest sample was 9.4 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
PFNA, EPA’s 2029 limit 10 ppt; highest 6.5 ppt

Highest sample, Dec. 20, 2023; found in 2 of 8 · Comes from the source

The highest sample was 6.5 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFNA
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 33.1 ppb

Highest yearly average, 2020 to 2024 · Forms or is added in treatment

Averaged by year, the highest was 33.1 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 81 ppb. That was also the latest year on file. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 31.4 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 33.7 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 28 ppb · Forms or is added in treatment

Averaged by year, the highest was 33.7 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 71 ppb. In 2024, the latest year on file, its 40 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 43.5 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Lead, Action level 15 ppb · health goal zero; 90th percentile 3.1 ppb

90th percentile, 2023 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 3.1 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.7 ppb

Highest yearly average, 2020 · Comes from the source

Averaged by year, the highest was 1.7 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 2.1 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.2 ppb, in 2017.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.67 ppm

Highest yearly average, 2020 to 2024 · 2024 average: 0.67 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.67 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.84 ppm. In 2024, the latest year on file, its 49 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.67 ppm, in 2017.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.67 ppm

Highest sample; found in 25 of 25 · 2024 average: 0.11 ppm · Comes from the source

The highest sample, in 2024, was 0.67 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its 15 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.0 ppm, in 2014.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.49 ppb

Highest yearly average, 2020 · Comes from the source

Averaged by year, the highest was 0.49 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.5 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.75 ppb, in 2014.

What handles it

About uranium
PFBS, Health benchmark 2,000 ppt; highest 4.6 ppt

Highest sample, May 15, 2024; found in 6 of 8 · Comes from the source

The highest sample was 4.6 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
Chromium (total), Legal limit 100 ppb; highest yearly average 0.2 ppb

Highest yearly average, 2020 · Comes from the source

Averaged by year, the highest was 0.2 ppb, in 2020, below EPA’s legal limit of 100 ppb. Its highest single sample was 0.3 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.28 ppb, in 2014.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)14 ppt highest, found in 6 of 8 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)33 ppt highest, found in 6 of 8 samples. Details
PFHxS10 pptBelow EPA’s limits9.4 ppt highest, found in 3 of 8 samples. Details
PFNA10 pptBelow EPA’s limits6.5 ppt highest, found in 2 of 8 samples. Details
HFPO-DA (GenX)10 pptNot foundNot found in any of 8 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits4.6 ppt highest, found in 6 of 8 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits1.44 at its highest sampling location, Hialeah WTP. EPA compares it at one significant digit, so it rounds to 1, at the limit, not above it
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Florida utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
6:2 FTS190 ppt3 of 8None covers it
PFHxA58 ppt6 of 8None covers it
PFPeA56 ppt6 of 8None covers it
PFBA22 ppt6 of 8None covers it
PFHpA20 ppt5 of 8NSF/ANSI 53: Total PFAS Reduction
8:2 FTS9.6 ppt2 of 8None covers it
19 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, PFOA, Lead, Arsenic

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: PFOS, PFOA, Lead, Arsenic, Uranium

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

MDWASA - Main System reported chloramine at 3 of its 4 sampling points and chlorine without chloramine at 0, and only other disinfectants at 1, in its 2023 to 2024 sampling for EPA. Which one reaches your tap can depend on where you live. It also reported ozone and permanganate.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 7 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic, fluoride, nitrate, uranium and chromium (total) results here are Florida’s own from 2020 on, with EPA’s national file for 2012 to 2019. MDWASA - Main System’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Nov. 8, 2023 to May 15, 2024; Florida’s results run from Jan. 6, 2020 to Dec. 23, 2024.

Testing your own tap

MDWASA - Main System’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Florida certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. MDWASA - Main System’s latest lead sampling in EPA’s records, 2023, had a 90th percentile of 3.1 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What MDWASA - Main System’s results flag: PFOS and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Florida certifies closest to the area MDWASA - Main System serves, or a kit by mail

The 3 labs Florida certifies closest to the area MDWASA - Main System serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • FL Department of Health - Miami Branch Laboratory

    Miami, FL · about 2 miles

    Certified for bacteria

    (305) 324-2432

  • EMSL Analytical, Inc. - FL

    North Miami Beach, FL · about 13 miles

    Certified for asbestos

    (305) 650-0577

  • Advanced Environmental Laboratories, Inc. - Miami

    Miramar, FL · about 14 miles

    Certified for bacteria, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (954) 889-2288

All 212 certified labs for Florida⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Florida certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Florida’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID FL4130871. Rebuilt from EPA data on Oct. 25, 2026.