Citrus Co Utl/Charles A. Black
EPA’s and Florida’s records have results for 37 contaminants in its water; 11 were found.
Serves 29,218 people · Groundwater · Lecanto, FL
- Serves
- 29,218 people
- Connections
- 10,834
- Water source
- Groundwater
- Based in
- Lecanto, FL
- County
- Citrus
- Owner
- Local government
The short answer
None of the results here is above a limit in force today. PFOS is above EPA’s new limit, which takes effect in 2029. PFHxS had a sample above it, but not on average, the way EPA will judge it. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Jan. 25 to July 30, 2024.
Lead and copper: EPA SDWIS monitoring periods ending 1999 to 2023.
Nitrate, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5), fluoride and chromium (total): Florida’s own results, samples taken from April 6, 2020 to July 9, 2024, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: PFOS, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. None of the other 23 PFAS tested for was found.
Above EPA’s new limit, which takes effect in 2029, 1 result
PFOS
Comes from the source
25 ppt
Highest sample, Jan. 25, 2024; found in 2 of 6
The highest sample was 25 ppt, about 6.3 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 18 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
A sample above EPA’s 2029 limit, below it on average, 1 result
PFHxS
Comes from the source
19 ppt
Highest sample, Jan. 25, 2024; found in 2 of 6
The highest sample was 19 ppt, about twice EPA’s new limit of 10 ppt, which takes effect in 2029. EPA’s health goal is 10 ppt. Averaged at each sampling location, the way EPA will judge it, it is at the limit as EPA rounds results, not above it.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 14.5 ppt, at it as EPA rounds results, not above it.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Below EPA’s limits, 9 results
Lead and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 13 ppb
Highest sample, Jan. 25, 2024; found in 1 of 6 · Comes from the source
The highest sample was 13 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportNitrate, Legal limit 10 ppm; highest 1.7 ppm
Highest sample; found in 17 of 17 · 2024 average: 0.8 ppm · Comes from the source
The highest sample, in 2021, was 1.7 ppm, below EPA’s legal limit of 10 ppm. In 2024, the latest year on file, its five samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 1.7 ppm, in 2019.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.4 ppb
90th percentile, 2023 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 1.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 5.3 ppb
Highest yearly average, 2020 to 2024 · Forms or is added in treatment
Averaged by year, the highest was 5.3 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 10.8 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 10.3 ppb, in 2019.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.6 ppb
Highest yearly average, 2020 · Comes from the source
Averaged by year, the highest was 0.6 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 0.7 ppb. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.7 ppb, in 2014.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 1.6 ppb
Highest yearly average, 2020 to 2024 · 2024 average: 0.65 ppb · Forms or is added in treatment
Averaged by year, the highest was 1.6 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 1.7 ppb. In 2024, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.8 ppb, in 2018.
What handles it
No certification claim covers this compound yet.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.067 ppm
Highest yearly average, 2020 · Forms or is added in treatment
Averaged by year, the highest was 0.067 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.073 ppm. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.086 ppm, in 2017.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Chromium (total), Legal limit 100 ppb; highest yearly average 0.37 ppb
Highest yearly average, 2020 · Comes from the source
Averaged by year, the highest was 0.37 ppb, in 2020, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.1 ppb. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 2.5 ppb, in 2014.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
PFBS, Health benchmark 2,000 ppt; highest 3.7 ppt
Highest sample, Jan. 25, 2024; found in 1 of 6 · Comes from the source
The highest sample was 3.7 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Not foundNot found in any of 6 samples, below 4 ppt |
| PFOS | 4.0 ppt | Above EPA’s new limit (2029)25 ppt highest, found in 2 of 6 samples. Details |
| PFHxS | 10 ppt | A sample above EPA’s 2029 limit19 ppt highest, found in 2 of 6 samples. Details |
| PFNA | 10 ppt | Not foundNot found in any of 6 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 6 samples, below 5 ppt |
| PFBS | Index only | Below EPA’s limits3.7 ppt highest, found in 1 of 6 samples. Details |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Below EPA’s limits1.45 at its highest sampling location, Lecanto WTP. EPA compares it at one significant digit, so it rounds to 1, at the limit, not above it |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.
- NSF/ANSI 53
Claims: PFOS Reduction, Total PFAS Reduction, Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction
For: PFOS, PFHxS, Lead, Arsenic
Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)
Other claims that cover it: Perfluorohexane Sulfonic Acid (PFHxS); Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Perfluorooctane Sulfonate (PFOS), Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction
For: PFOS, Lead, Arsenic
Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Under-sink carbon
Five years: $1,090, household of 3, cartridges included
Certified for: PFOS, PFHxS
Ninja HydraSense Countertop Water Filtration System (WF1001)
Countertop
Five years: $2,050, household of 3, cartridges included
Certified for: PFOS, PFHxS; also lead, found below its limits
Culligan 10-Cup Pitcher with ZeroWater Technology (ZEROP10)
Pitcher
Five years: $5,103, household of 3, cartridges included
Certified for: PFOS, PFHxS; also lead, found below its limits
2 more filters
Culligan MaxClear Scout Gravity Water Filter (MCS701P)
Dispenser
Five years: $8,840, household of 3, cartridges included
Certified for: PFOS, PFHxS; also lead, found below its limits
Every filter for these, those that cover both first
The best water filters for PFAS, ranked
Disinfectant
Citrus Co Utl/Charles A. Black reported adding chloramine before water enters its pipes, at all 3 of its sampling points, in its 2024 sampling for EPA.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. There are 14 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Nitrate, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5), fluoride and chromium (total) results here are Florida’s own from 2020 on, with EPA’s national file for 2012 to 2019. Citrus Co Utl/Charles A. Black’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 25 to July 30, 2024; Florida’s results run from April 6, 2020 to July 9, 2024.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Citrus Co Utl/Charles A. Black’s latest lead sampling in EPA’s records, 2023, had a 90th percentile of 1.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Citrus Co Utl/Charles A. Black’s results flag: PFOS and PFHxS. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Florida certifies closest to the area Citrus Co Utl/Charles A. Black serves, or a kit by mail
The 3 labs Florida certifies closest to the area Citrus Co Utl/Charles A. Black serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Marion County Water Test Lab., LLC
Ocala, FL · about 27 miles
Certified for bacteria
Aqua Pure Water & Sewage Service, LLC
Ocala, FL · about 31 miles
Certified for bacteria
Central Florida Water Testing LLC DBA Plant Technicians
Leesburg, FL · about 37 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Florida certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Florida’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 2 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with PFOS
- Get the utility’s own reportCitrus Co Utl/Charles A. Black must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Florida Department of Environmental Protection, Drinking Water Program, results from Jan. 2, 2020 to Dec. 31, 2024, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Florida Department of Health Environmental Laboratory Certification Program, drinking water labs, as listed in TNI LAMS, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID FL6094948. Rebuilt from EPA data on Oct. 25, 2026.