Skip to content
TapBuff

Harrington Water Department

EPA’s and Delaware’s records have results for 7 contaminants in its water; 3 were found.

Serves 3,562 people · Groundwater · Harrington, DE

Serves
3,562 people
Connections
1,251
Water source
Groundwater
Based in
Harrington, DE
County
Kent
Owner
Local government
The ZIP code it serves

19952

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic, chromium (total) and nitrate: Delaware’s own results, samples taken from Jan. 7, 2020 to Sept. 24, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 25.4 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 10.0 ppb · Forms or is added in treatment

Averaged by year, the highest was 25.4 ppb, in 2024, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 16 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 10.8 ppb

Highest yearly average, 2020 to 2025 · 2025, one sample: 6.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 10.8 ppb, in 2020, below EPA’s legal limit of 60 ppb. In 2025, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 11 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.7 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.035 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.7 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.2 ppm. In 2026, the latest year on file, its 16 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.84 ppm, in 2013.

What handles it

About fluoride
4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic, chromium (total) and nitrate results here are Delaware’s own from 2020 on, with EPA’s national file for 2012 to 2019. Harrington Water Department’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Delaware’s results run from Jan. 7, 2020 to Sept. 24, 2026.

Testing your own tap

Harrington Water Department’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Delaware certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Harrington Water Department’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Delaware certifies closest to the area Harrington Water Department serves, or a kit by mail

The 3 labs Delaware certifies closest to the area Harrington Water Department serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

All 13 certified labs for Delaware⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Delaware certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Delaware’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID DE0000126. Rebuilt from EPA data on Oct. 25, 2026.