Skip to content
TapBuff

Milford Water Department

EPA’s and Delaware’s records have results for 37 contaminants in its water; 5 were found.

Serves 9,800 people · Groundwater · Milford, DE

Serves
9,800 people
Connections
4,398
Water source
Groundwater
Based in
Milford, DE
County
Kent
Owner
Local government
The ZIP code it serves

19963

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 8 to July 9, 2025.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5) and fluoride: Delaware’s own results, samples taken from Jan. 28, 2020 to Sept. 16, 2026, with EPA’s 2012 to 2019 file for earlier years.

Arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from Aug. 18, 2016 to June 26, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

15 ppb

Highest sample, July 9, 2025; found in 8 of 10

The highest sample was 15 ppb, above EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 3.5 ppm

Highest sample; found in 2 of 444 · 2026: not found · Comes from the source

The highest sample, in 2020, was 3.5 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in any of its 48 samples.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 23.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 22.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 23.1 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 38.4 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 68.6 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 15.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 10.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 15.6 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 16.1 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 22 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.68 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.38 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.68 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 3.7 ppm. In 2026, the latest year on file, its 48 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.99 ppm, in 2013.

What handles it

About fluoride
Delaware utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

1 health-based violation since 2016 for fluoride. It began June 23, 2020.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
FluorideThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJune 23, 2020 to July 22, 2020, 0.78 ppmResolved

Health-based violations only.

Disinfectant

Milford Water Department reported disinfecting with chlorine, not chloramine, at all 5 of its sampling points, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5) and fluoride results here are Delaware’s own from 2020 on, with EPA’s national file for 2012 to 2019. Arsenic and chromium (total) come from EPA’s file alone, which ends in 2019. Milford Water Department’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 8 to July 9, 2025; Delaware’s results run from Jan. 28, 2020 to Sept. 16, 2026; EPA’s compliance samples are from Aug. 18, 2016 to June 26, 2019.

Testing your own tap

Milford Water Department’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Delaware certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Milford Water Department’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Milford Water Department’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Delaware certifies closest to the area Milford Water Department serves, or a kit by mail

The 3 labs Delaware certifies closest to the area Milford Water Department serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

All 13 certified labs for Delaware⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Delaware certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Delaware’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID DE0000616. Rebuilt from EPA data on Oct. 25, 2026.