Skip to content
TapBuff

East Lyme Water & Sewer Commission

EPA’s and CDC’s records have results for 38 contaminants in its water; 11 were found.

Serves 15,245 people · Surface water bought from another system · East Lyme, CT

Serves
15,245 people
Connections
6,119
Water source
Surface water bought from another system
Based in
East Lyme, CT
County
New London
Owner
Local government
The 2 ZIP codes it serves

06333, 06357

The short answer

None of the results here is above a limit in force today. PFOA and PFOS are above EPA’s new limit, which takes effect in 2029. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from May 23, 2023 to Aug. 13, 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic and uranium: Connecticut’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from July 10, 2014 to Dec. 18, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOA, PFOS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFPeA at 5.6 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOA

Comes from the source

Above EPA’s new limit (2029)

9.2 ppt

Highest sample, Nov. 14, 2023; found in 4 of 14

The highest sample was 9.2 ppt, about 2.3 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 8.6 ppt, also above it.

What handles it

PFOS

Comes from the source

Above EPA’s new limit (2029)

7.2 ppt

Highest sample, Nov. 14, 2023; found in 4 of 14

The highest sample was 7.2 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 7.0 ppt, also above it.

What handles it

Below EPA’s limits, 6 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 20.1 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 18.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 20.1 ppb, in 2022, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 12.5 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.8 ppm

Highest yearly average, 2014 to 2018 · 2018, one sample: 0.52 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.8 ppm, in 2016, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.0 ppm. In 2018, the latest year on file, its one sample was below the limit.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 9.3 ppb

Highest yearly average, 2020 to 2023 · Forms or is added in treatment

Averaged by year, the highest was 9.3 ppb, in 2023, below EPA’s legal limit of 60 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.4 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest yearly average 1.5 ppm

Highest yearly average, 2020 to 2023 · 2023 average: 0.97 ppm · Comes from the source

Averaged by year, the highest was 1.5 ppm, in 2020, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.2 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 3.0 ppb

Highest yearly average, 2014 to 2018 · 2018, one sample: 3.0 ppb · Comes from the source

Averaged by year, the highest was 3.0 ppb, in 2017, below EPA’s legal limit of 100 ppb. Its highest single sample was 4.0 ppb. In 2018, the latest year on file, its one sample was below the limit.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 4.8 ppt

Highest sample, Nov. 14, 2023; found in 2 of 14 · Comes from the source

The highest sample was 4.8 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)9.2 ppt highest, found in 4 of 14 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)7.2 ppt highest, found in 4 of 14 samples. Details
PFHxS10 pptNot foundNot found in any of 14 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 14 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 14 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits4.8 ppt highest, found in 2 of 14 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Connecticut utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA5.6 ppt4 of 14None covers it
PFHxA5.4 ppt3 of 14None covers it
PFHpA3.0 ppt1 of 14NSF/ANSI 53: Total PFAS Reduction
27 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: PFOA Reduction, PFOS Reduction

    For: PFOA, PFOS

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS)

    For: PFOA, PFOS

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

Disinfectant

East Lyme Water & Sewer Commission reported disinfecting with chlorine, not chloramine, at all 6 of its sampling points, in its 2023 to 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 79 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic and uranium results here are Connecticut’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. East Lyme Water & Sewer Commission’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 23, 2023 to Aug. 13, 2024; CDC’s yearly averages for Connecticut cover 2020 to 2023; EPA’s compliance samples are from July 10, 2014 to Dec. 18, 2018.

Testing your own tap

East Lyme Water & Sewer Commission’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Connecticut certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. East Lyme Water & Sewer Commission’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What East Lyme Water & Sewer Commission’s results flag: PFOA and PFOS. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Connecticut certifies closest to the area East Lyme Water & Sewer Commission serves, or a kit by mail

The 3 labs Connecticut certifies closest to the area East Lyme Water & Sewer Commission serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Eastern Analytical Laboratory, Inc.

    Old Saybrook, CT · about 9 miles

    Certified for bacteria, nitrate, metals, minerals and other inorganics

    (860) 388-2378

  • CorrTech Corrosion Laboratory

    Deep River, CT · about 13 miles

    Certified for minerals and other inorganics

    (860) 526-2610

  • Environmental Consulting Lab

    Madison, CT · about 21 miles

    Certified for bacteria, nitrate, metals, minerals and other inorganics, radioactivity

    (203) 245-0568

All 86 certified labs for Connecticut⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Connecticut certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Connecticut’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CT0450011. Rebuilt from EPA data on Oct. 25, 2026.