Skip to content
TapBuff

Gateway MD

What EPA’s and Colorado’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
160 people
Connections
75
Water source
Groundwater
Based in
Glenwood Springs, CO
County
Pitkin
Owner
Local government
The ZIP code it serves

81654

The short answer

2 results are above the health goal. The worst: Lead, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2007 to 2025.

Uranium, total trihalomethanes (TTHM), fluoride, nitrate, arsenic, chromium (total) and haloacetic acids (HAA5): Colorado’s own results, samples taken from Jan. 21, 2020 to Aug. 3, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal2

Lead

Comes from pipes, often your own

Above the health goal

4.5ppb

90th percentile, 2023 to 2025

In the latest period, 9 in 10 homes sampled were at or below 4.5 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Uranium

Comes from the source

Above the health goal

3.0ppb

Highest yearly average, 2025 to 2026

2026, one sample: 2.7 ppb

Averaged by year, the highest was 3.0 ppb, in 2025: below EPA’s legal limit of 30 ppb, but above its health goal of zero. In 2026, the latest year on file, its one sample was 2.7 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 1.7 ppb, in 2018.

What handles it

Below EPA’s limits3

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

13.4ppb

Highest yearly average, 2020 to 2026

2026: not found

Averaged by year, the highest was 13.4 ppb, in 2021, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, it wasn’t found in any of its two samples. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 1.5 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.17ppm

Highest yearly average, 2020

Averaged by year, the highest was 0.17 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.22 ppm, in 2015.

What handles it

Nitrate

Comes from the source

Below EPA’s limits

0.41ppm

Highest sample; found in 7 of 8

2026 average: 0.2 ppm

The highest sample, in 2025, was 0.41 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its two samples averaged 0.2 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.57 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Haloacetic acids (HAA5)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Violations since 2016

No health-based violations on file with EPA since 2016.

What this report can’t tell you

  • Everything else. Uranium, total trihalomethanes (TTHM), fluoride, nitrate, arsenic, chromium (total) and haloacetic acids (HAA5) results here are Colorado’s own from 2020 on, with EPA’s national file for 2012 to 2019. Gateway MD’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Colorado’s results run from Jan. 21, 2020 to Aug. 3, 2026.

Testing your own tap

Gateway MD’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Colorado certifies.

The lab Colorado certifies closest to the area Gateway MD serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Eagle River W / S District

    Avon, CO · about 39 miles

    Certified for bacteria, lead and copper, metals, radioactivity

All 54 certified labs for Colorado

Sources

PWSID CO0149300. Rebuilt from EPA data on Oct. 18, 2026.