Skip to content
TapBuff

Wilshire Heights Mutual Water Company

What EPA’s and California’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
70 people
Connections
41
Water source
Groundwater
Based in
Santa Rosa, CA
County
Sonoma
Owner
Private
Hardness
Hard
The ZIP code it serves

95404

The short answer

Nothing in EPA’s and California’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Fluoride, arsenic, chromium (total), haloacetic acids (HAA5), nitrate and total trihalomethanes (TTHM): California’s own results, samples taken from May 13, 2020 to May 19, 2026, with EPA’s 2012 to 2019 file for earlier years.

Below EPA’s limits1

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.1ppm

Highest yearly average, 2020 to 2023

2023: not found

Averaged by year, the highest was 0.1 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. In 2023, the latest year on file, it wasn’t found in its one sample.

What handles it

6 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Haloacetic acids (HAA5)
  • Lead
  • Nitrate
  • Total trihalomethanes (TTHM)

Hardness

Hard, 160 mg/L (9.4 grains per gallon), at its one sampling point, 2020 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Fluoride, arsenic, chromium (total), haloacetic acids (HAA5), nitrate and total trihalomethanes (TTHM) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Wilshire Heights Mutual Water Company’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from May 13, 2020 to May 19, 2026.

Testing your own tap

Wilshire Heights Mutual Water Company’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

The 3 labs California certifies closest to the area Wilshire Heights Mutual Water Company serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Sonoma County Public Health Laboratory

    Santa Rosa, CA · about 4 miles

    Certified for bacteria

    (707) 565-4711

  • K Prime, LLC.

    Santa Rosa, CA · about 6 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, PFAS

    (707) 527-7574

  • Brelje and Race Laboratories, Inc.

    Santa Rosa, CA · about 6 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (707) 544-8807

All 145 certified labs for California

Sources

PWSID CA4900573. Rebuilt from EPA data on Oct. 18, 2026.