Skip to content
TapBuff

Pinebrook Community Water Well

What EPA’s and California’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
68 people
Connections
42
Water source
Groundwater
Based in
Wofford Heights, CA
County
Kern
Owner
Private
Hardness
Very hard
The ZIP code it serves

93285

The short answer

1 result is above the health goal. The worst: Uranium, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Fluoride, nitrate, total trihalomethanes (TTHM), arsenic and chromium (total): California’s own results, samples taken from Nov. 30, 2020 to Feb. 27, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from Sept. 25, 2018 to Sept. 25, 2018. Newer results are in the utility’s annual water quality report.

Above the health goal1

Uranium

Comes from the source

Above the health goal

0.71ppb

Highest yearly average, 2018

Averaged by year, the highest was 0.71 ppb, in 2018: below EPA’s legal limit of 30 ppb, but above its health goal of zero. Its highest single sample was 1.4 ppb. That is the only year on file.

What handles it

Below EPA’s limits3

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.99ppm

Highest yearly average, 2023 to 2026

Averaged by year, the highest was 0.99 ppm, in 2026, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.1 ppm. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.95 ppm, in 2013.

What handles it

Nitrate

Comes from the source

Below EPA’s limits

0.16ppm

Highest sample; found in 3 of 18

2026 average: 0.035 ppm

The highest sample, in 2024, was 0.16 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its four samples averaged 0.035 ppm.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

1.1ppb

Highest yearly average, 2021

Averaged by year, the highest was 1.1 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 2.2 ppb. That is the only year on file.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.

Compare five-year costs

Hardness

Very hard, typically 260 mg/L (15.2 grains per gallon), across 2 sampling points, 2023 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Fluoride, nitrate, total trihalomethanes (TTHM), arsenic and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Pinebrook Community Water Well’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from Nov. 30, 2020 to Feb. 27, 2026; EPA’s compliance samples are from Sept. 25, 2018 to Sept. 25, 2018.

Testing your own tap

Pinebrook Community Water Well’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

The 3 labs California certifies closest to the area Pinebrook Community Water Well serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Pace Analytical Services, LLC dba BC Laboratories, Inc.

    Bakersfield, CA · about 37 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (661) 327-4911

  • Zalco Laboratories, Inc.

    Bakersfield, CA · about 37 miles

    Certified for bacteria, nitrate, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (661) 395-0539

  • BSK Associates - Bakersfield Analytical Laboratory

    Bakersfield, CA · about 42 miles

    Certified for bacteria

    (661) 327-0671

All 145 certified labs for California

Sources

PWSID CA1500404. Rebuilt from EPA data on Oct. 18, 2026.