Skip to content
TapBuff
ZIP

Lucerne Vista MWC

What EPA’s and California’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
224 people
Connections
61
Water source
Groundwater
Based in
Lucerne Valley, CA
County
San Bernardino
Owner
Private
Hardness
Varies by source
The ZIP code it serves

92356

The short answer

1 result is above the limit’s level with no violation recorded, and 1 more is above the health goal. The worst: Arsenic, above the limit’s level, no violation. No health-based violations on file since 2016.

What handles it

What was found

Arsenic, uranium, fluoride, nitrate, chromium (total) and total trihalomethanes (TTHM): California’s own results, samples taken from Dec. 30, 2020 to April 20, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the limit’s level, no violation recorded1

Arsenic

Comes from the source

Above the limit’s level, no violation

13ppb

Highest yearly average, 2020 to 2026

2026 average: 3.8 ppb

Averaged by year, the highest was 13 ppb, in 2023, above EPA’s legal limit of 10 ppb. In 2026, the latest year on file, its five samples averaged 3.8 ppb. EPA judges this limit on running averages at each sampling point, and recorded no violation for arsenic at this utility since 2020. Results like these with no violation often include water sampled before treatment or blending; the utility’s annual report says what reaches the tap. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 4.8 ppb, in 2015.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Above the health goal1

Uranium

Comes from the source

Above the health goal

8.6ppb

Highest yearly average, 2020 to 2025

2025 average: 5.5 ppb

Averaged by year, the highest was 8.6 ppb, in 2022: below EPA’s legal limit of 30 ppb, but above its health goal of zero. In 2025, the latest year on file, its two samples averaged 5.5 ppb.

What handles it

Below EPA’s limits2

Fluoride

Forms or is added in treatment

Below EPA’s limits

2.3ppm

Highest yearly average, 2020 to 2026

2026 average: 0.64 ppm

Averaged by year, the highest was 2.3 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, its five samples averaged 0.64 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.7 ppm, in 2015.

What handles it

Nitrate

Comes from the source

Below EPA’s limits

1.4ppm

Highest sample; found in 21 of 23

2025 average: 0.81 ppm

The highest sample, in 2020, was 1.4 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its four samples averaged 0.81 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 1.4 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Lead
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Arsenic, Uranium

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Hardness

Moderately hard to hard depending on the source, 115 to 145 mg/L (6.7 to 8.5 grains per gallon), across 3 sampling points, 2020 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared, salt includedSoftener or salt-free conditioner?California water hardness, utility by utility

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, uranium, fluoride, nitrate, chromium (total) and total trihalomethanes (TTHM) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Lucerne Vista MWC’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from Dec. 30, 2020 to April 20, 2026.

Testing your own tap

Lucerne Vista MWC’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

The 3 labs California certifies closest to the area Lucerne Vista MWC serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Geo-Monitor, Inc

    Hesperia, CA · about 23 miles

    Certified for bacteria

    (760) 244-3481

  • BSK Associates - San Bernardino Analytical Laboratory

    San Bernardino, CA · about 38 miles

    Certified for bacteria

    (559) 497-2888

  • Clinical Laboratory of San Bernardino, Inc.

    Grand Terrace, CA · about 41 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (909) 825-7693

All 145 certified labs for California

Sources

PWSID CA3600157. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in San Bernardino County

All California utilities

What to do next