Skip to content
TapBuff
ZIP

Los Alamos Community Services District

What EPA’s and California’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
1,534 people
Connections
649
Water source
Groundwater
Based in
Los Alamos, CA
County
Santa Barbara
Owner
Local government
Hardness
Very hard
The ZIP code it serves

93440

The short answer

1 result is above the health goal. The worst: Arsenic, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 2.0 ppm, for the period ending Dec. 31, 1996. None since is on file, so it is not counted as a current finding.

Arsenic, nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), chromium (total) and fluoride: California’s own results, samples taken from March 25, 2020 to May 20, 2026, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal1

Arsenic

Comes from the source

Above the health goal

5.0ppb

Highest yearly average, 2022 to 2025

Averaged by year, the highest was 5.0 ppb, in 2025: below EPA’s legal limit of 10 ppb, but above its health goal of zero. Its highest single sample was 9.0 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 4.0 ppb, in 2019.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Below EPA’s limits5

Nitrate

Comes from the source

Below EPA’s limits

8.2ppm

Highest sample; found in 34 of 34

2026 average: 2.6 ppm

The highest sample, in 2020, was 8.2 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged 2.6 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 4.6 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

17ppb

Highest yearly average, 2020 to 2025

Averaged by year, the highest was 17 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 24 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 14 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

11ppb

Highest yearly average, 2020 to 2025

2025: not found

Averaged by year, the highest was 11 ppb, in 2020, below EPA’s legal limit of 60 ppb. In 2025, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 3.0 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

Chromium (total)

Comes from the source

Below EPA’s limits

3.3ppb

Highest yearly average, 2022 to 2025

Averaged by year, the highest was 3.3 ppb, in 2025, below EPA’s legal limit of 100 ppb. Its highest single sample was 13 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 2.0 ppb, in 2016.

What handles it

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.075ppm

Highest yearly average, 2022 to 2025

2025 average: 0.075 ppm

Averaged by year, the highest was 0.075 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.1 ppm. In 2025, the latest year on file, its four samples averaged 0.075 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.1 ppm, in 2016.

What handles it

One compound tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Lead

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Hardness

Very hard, typically 249 mg/L (14.6 grains per gallon), across 4 sampling points, 2019 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared at 14.6 grains per gallon, salt includedSoftener or salt-free conditioner?California water hardness, utility by utility

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), chromium (total) and fluoride results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Los Alamos Community Services District’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from March 25, 2020 to May 20, 2026.

Testing your own tap

Los Alamos Community Services District’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

The 3 labs California certifies closest to the area Los Alamos Community Services District serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Clinical Laboratory of San Bernardino II

    Lompoc, CA · about 13 miles

    Certified for bacteria

    (805) 737-7300

  • Oilfield Environmental & Compliance Inc. (OEC)

    Santa Maria, CA · about 21 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (805) 922-4772

  • Abalone Coast Analytical, Inc.

    San Luis Obispo, CA · about 44 miles

    Certified for bacteria

    (805) 595-1080

All 145 certified labs for California

Sources

PWSID CA4210002. Rebuilt from EPA data on Oct. 18, 2026.

Also in Santa Barbara County

All California utilities

What to do next