Gric DPW Sacaton
EPA’s records have results for 38 contaminants in its water; 9 were found.
Serves 5,307 people · Groundwater · Sacaton, Sacaton Flats,upper San Tan, Bl, AZ
- Serves
- 5,307 people
- Connections
- 1,449
- Water source
- Groundwater
- Based in
- Sacaton, Sacaton Flats,upper San Tan, Bl, AZ
- Owner
- Native American
The short answer
None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
Filters for uranium, arsenic and lead, if you want them lowerThe violationGot a notice? What it means
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from April 3 to Oct. 4, 2023.
Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.
Uranium, nitrate, fluoride, arsenic, total trihalomethanes (TTHM), haloacetic acids (HAA5) and chromium (total): EPA’s compliance monitoring file, samples taken from March 13, 2012 to Nov. 22, 2019. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
150 ppb
Highest sample, April 3, 2023; found in 6 of 6
The highest sample was 150 ppb, about 15 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 8 results
Uranium, arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 26.9 ppb
Highest yearly average, 2012 to 2019 · 2019 average: 20.8 ppb · Comes from the source
Averaged by year, the highest was 26.9 ppb, in 2012, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 29 ppb. In 2019, the latest year on file, its five samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Uranium”
Nitrate, Legal limit 10 ppm; highest 8.2 ppm
Highest sample; found in 55 of 55 · 2019 average: 5.5 ppm · Comes from the source
The highest sample, in 2013, was 8.2 ppm, below EPA’s legal limit of 10 ppm. In 2019, the latest year on file, its six samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.5 ppm
Highest yearly average, 2013 to 2019 · Forms or is added in treatment
Averaged by year, the highest was 1.5 ppm, in 2019, below EPA’s legal limit of 4.0 ppm. That was also the latest year on file.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 3.1 ppb
Highest yearly average, 2012 to 2019 · 2019, one sample: 2.9 ppb · Comes from the source
Averaged by year, the highest was 3.1 ppb, in 2017, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 4.0 ppb. In 2019, the latest year on file, its one sample was below the limit.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 18 ppb
Highest yearly average, 2013 to 2019 · 2019, one sample: 10 ppb · Forms or is added in treatment
Averaged by year, the highest was 18 ppb, in 2015, below EPA’s legal limit of 80 ppb. Its highest single sample was 26 ppb. In 2019, the latest year on file, its one sample was below the limit.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.3 ppb
90th percentile, 2023 to 2025 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 1.3 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 4.0 ppb
Highest yearly average, 2013 to 2019 · 2019, one sample: 2.4 ppb · Forms or is added in treatment
Averaged by year, the highest was 4.0 ppb, in 2015, below EPA’s legal limit of 60 ppb. Its highest single sample was 5.0 ppb. In 2019, the latest year on file, its one sample was below the limit.
What handles it
No certification claim covers this compound yet.
Chromium (total), Legal limit 100 ppb; highest yearly average 3.4 ppb
Highest yearly average, 2013 · Comes from the source
Averaged by year, the highest was 3.4 ppb, in 2013, below EPA’s legal limit of 100 ppb. That is the only year on file.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
29 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
1 health-based violation since 2016 for the Lead and Copper Rule Revisions. It began Oct. 17, 2024.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Lead and Copper Rule Revisions | The required inventory of lead service lines was not completed or submitted on time.EPA: LSL Inventory | Oct. 17, 2024 | Resolved |
Health-based violations only. 4 monitoring or reporting violations not shown.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction
For: Arsenic, Lead
Other claims that cover it: Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Uranium, Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction
For: Uranium, Arsenic, Lead
Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Under-sink reverse osmosis
Five years: $549, household of 3, cartridges included
WQA listing: NSF/ANSI 58, checked Oct. 9, 2026
Certified for: Arsenic, Lead
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Arsenic, Lead
Brondell Capella RC250 Reverse Osmosis System
Under-sink reverse osmosis
Five years: $1,950, household of 3, cartridges included
Certified for: Arsenic, Lead
2 more filters
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: Arsenic, Lead
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: Lead
Every filter for these, those that cover all 3 first
Disinfectant
Gric DPW Sacaton reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2023 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Newer results, and everything else. Nitrate, arsenic, fluoride, chromium, uranium and disinfection byproduct results here come from EPA’s national compliance file, which ends in 2019. Gric DPW Sacaton’s own annual report, which it must send you every year, has newer results and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 3 to Oct. 4, 2023; EPA’s compliance samples are from March 13, 2012 to Nov. 22, 2019.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Gric DPW Sacaton’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 1.3 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Gric DPW Sacaton’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Arizona certifies closest to the area Gric DPW Sacaton serves, or a kit by mail
The 3 labs Arizona certifies closest to the area Gric DPW Sacaton serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Radiation Safety Engineering, Inc.
Chandler, AZ · about 20 miles
AnalysisNow! Inc.
Chandler, AZ · about 20 miles
Statewide Laboratory
Mesa, AZ · about 25 miles
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Arizona certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Arizona’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on lithiumWhat it does to health, where it comes from, and the certification claim that addresses it.About lithium
- Get the utility’s own reportGric DPW Sacaton must send you a water quality report every year. It has newer results than EPA’s national file, which ends in 2019.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Arizona Department of Health Services, Arizona certified commercial drinking water laboratories, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID 090400047. Rebuilt from EPA data on Oct. 25, 2026.