Skip to content
TapBuff

Epcor - Sun City

EPA’s and CDC’s records have results for 37 contaminants in its water; 6 were found.

Serves 38,016 people · Groundwater · Sun City, AZ

Serves
38,016 people
Connections
23,082
Water source
Groundwater
Based in
Sun City, AZ
County
Maricopa
Owner
Private
The 5 ZIP codes it serves

85351, 85363, 85373, 85378, 85383

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for arsenic, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 18 to Oct. 17, 2023.

Arsenic, nitrate, total trihalomethanes (TTHM) and haloacetic acids (HAA5): Arizona’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from July 20, 2012 to Nov. 6, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

46.2 ppb

Highest sample, April 18, 2023; found in 14 of 14

The highest sample was 46.2 ppb, about 4.6 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 5 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 8.3 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 6.7 ppb · Comes from the source

Averaged by year, the highest was 8.3 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 8.3 ppb, in 2016.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest yearly average 3.7 ppm

Highest yearly average, 2020 to 2023 · 2023 average: 2.8 ppm · Comes from the source

Averaged by year, the highest was 3.7 ppm, in 2021, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 9.2 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 11 ppb

Highest yearly average, 2012 to 2018 · 2018 average: 9.4 ppb · Comes from the source

Averaged by year, the highest was 11 ppb, in 2012, below EPA’s legal limit of 100 ppb. Its highest single sample was 24 ppb. In 2018, the latest year on file, its eight samples averaged below the limit.

What handles it

About chromium (total)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.26 ppm

Highest yearly average, 2012 to 2018 · 2018 average: 0.23 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.26 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.38 ppm. In 2018, the latest year on file, its eight samples averaged below the limit.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 2.1 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 0.95 ppb · Forms or is added in treatment

Averaged by year, the highest was 2.1 ppb, in 2020, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.8 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Arizona utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Haloacetic acids (HAA5)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Epcor - Sun City reported disinfecting with chlorine, not chloramine, at all 7 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are Arizona’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. Epcor - Sun City’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 18 to Oct. 17, 2023; CDC’s yearly averages for Arizona cover 2020 to 2023; EPA’s compliance samples are from July 20, 2012 to Nov. 6, 2018.

Testing your own tap

Epcor - Sun City’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Arizona certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Epcor - Sun City’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Epcor - Sun City’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Arizona certifies closest to the area Epcor - Sun City serves, or a kit by mail

The 3 labs Arizona certifies closest to the area Epcor - Sun City serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Legend Technical Services of Arizona, Inc. DBA Legend Analytical

    Phoenix, AZ · about 14 miles

    (602) 324-6100

  • Motzz Laboratory, Inc.

    Phoenix, AZ · about 14 miles

    (602) 454-2376

  • Alliance Technical Group, LLC – Phoenix

    Phoenix, AZ · about 14 miles

    (714) 832-0064

All 49 certified labs for Arizona⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Arizona certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Arizona’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AZ0407099. Rebuilt from EPA data on Oct. 25, 2026.