Skip to content
TapBuff

Cottonwood Municipal Water Vv6

EPA’s and CDC’s records have results for 37 contaminants in its water; 7 were found.

Serves 4,518 people · Groundwater · Cottonwood, AZ

Serves
4,518 people
Connections
1,834
Water source
Groundwater
Based in
Cottonwood, AZ
County
Yavapai
Owner
Public and private
The ZIP code it serves

86326

The short answer

Lead is above the action level in the latest monitoring period, ending Dec. 31, 2026. Lithium is above EPA’s health benchmark. 6 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 6 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 3 to Nov. 10, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2009 to 2026.

Arsenic, nitrate, total trihalomethanes (TTHM) and haloacetic acids (HAA5): Arizona’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Feb. 14, 2013 to Feb. 19, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above the legal limit, 1 result

Lead

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s health goal for lead is zero: it can harm health even at low exposure. A utility over the action level must now tell its customers within 24 hours. Meanwhile, use only cold water for drinking, cooking and formula, run the tap after water has sat, and a filter certified for lead, at the tap you drink from, reduces it.

18 ppb

90th percentile, 2024 to 2026

In the latest period, 9 in 10 homes sampled were at or below 18 ppb, above EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

59 ppb

Highest sample, March 3, 2025; found in 12 of 12

The highest sample was 59 ppb, about 5.9 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 5 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 5.5 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 3.3 ppb · Comes from the source

Averaged by year, the highest was 5.5 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 8.0 ppb, in 2018, and EPA recorded violations in 2018 and 2019.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.32 ppm

Highest yearly average, 2013 to 2019 · 2019 average: 0.31 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.32 ppm, in 2016, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.33 ppm. In 2019, the latest year on file, its three samples averaged below the limit.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest yearly average 0.39 ppm

Highest yearly average, 2020 to 2023 · 2023 average: 0.33 ppm · Comes from the source

Averaged by year, the highest was 0.39 ppm, in 2020, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.92 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 1.6 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 0.55 ppb · Forms or is added in treatment

Averaged by year, the highest was 1.6 ppb, in 2021, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.5 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Chromium (total), Legal limit 100 ppb; highest yearly average 1.6 ppb

Highest yearly average, 2013 to 2019 · 2019: not found · Comes from the source

Averaged by year, the highest was 1.6 ppb, in 2016, below EPA’s legal limit of 100 ppb. Its highest single sample was 4.0 ppb. In 2019, the latest year on file, it wasn’t found in any of its three samples.

What handles it

About chromium (total)
Arizona utilities above EPA’s PFAS limits⁠
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Haloacetic acids (HAA5)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Cottonwood Municipal Water Vv6 reported disinfecting with chlorine, not chloramine, at all 6 of its sampling points, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

6 health-based violations since 2016, all for arsenic. The latest began Oct. 1, 2019.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
ArsenicThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2019 to Dec. 31, 2019, 11 ppbResolved
July 1, 2019 to Sept. 30, 2019, 11 ppbResolved
Oct. 1, 2018 to Dec. 31, 2018, 13 ppbResolved
July 1, 2018 to Sept. 30, 2018, 11 ppbResolved
April 1, 2018 to June 30, 2018, 13 ppbResolved
The other one, back to 2018
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
ArsenicThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageApril 1, 2018 to June 30, 2018, 14 ppbResolved

Health-based violations only. 16 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are Arizona’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Cottonwood Municipal Water Vv6’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 3 to Nov. 10, 2025; CDC’s yearly averages for Arizona cover 2020 to 2023; EPA’s compliance samples are from Feb. 14, 2013 to Feb. 19, 2019.

Testing your own tap

Cottonwood Municipal Water Vv6’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Arizona certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Cottonwood Municipal Water Vv6’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 18 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Cottonwood Municipal Water Vv6’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Arizona certifies closest to the area Cottonwood Municipal Water Vv6 serves, or a kit by mail

The 3 labs Arizona certifies closest to the area Cottonwood Municipal Water Vv6 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Bradshaw Mountain Environmental Inc.

    Prescott Valley, AZ · about 12 miles

    (928) 778-4510

  • Inner Basin Environmental, LLC

    Flagstaff, AZ · about 48 miles

    (928) 440-5168

  • Nortest Analytical

    Flagstaff, AZ · about 48 miles

    (928) 774-2312

All 49 certified labs for Arizona⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Arizona certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Arizona’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AZ0413106. Rebuilt from EPA data on Oct. 25, 2026.