Skip to content
TapBuff

Arizona Water Co - Lakeside

EPA’s and CDC’s records have results for 37 contaminants in its water; 8 were found.

Serves 12,191 people · Groundwater · Show Low, AZ

Serves
12,191 people
Connections
4,430
Water source
Groundwater
Based in
Show Low, AZ
County
Navajo
Owner
Private
The 2 ZIP codes it serves

85929, 85935

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for lead and arsenic, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Nov. 12, 2024 to May 21, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2005 to 2025.

Arsenic, total trihalomethanes (TTHM), nitrate and haloacetic acids (HAA5): Arizona’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Aug. 7, 2012 to June 22, 2015. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFBS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. None of the other 23 PFAS tested for was found.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

25.1 ppb

Highest sample, Nov. 12, 2024; found in 6 of 10

The highest sample was 25.1 ppb, about 2.5 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 7 results

Lead and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Lead, Action level 15 ppb · health goal zero; 90th percentile 7.8 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 7.8 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.7 ppb

Highest yearly average, 2021 · Comes from the source

Averaged by year, the highest was 1.7 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.0 ppb, in 2012.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 4.4 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 3.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 4.4 ppb, in 2021, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 5.6 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest yearly average 0.46 ppm

Highest yearly average, 2020 to 2023 · Comes from the source

Averaged by year, the highest was 0.46 ppm, in 2023, below EPA’s legal limit of 10 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.3 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 2.0 ppb

Highest yearly average, 2020 to 2023 · 2023: not found · Forms or is added in treatment

Averaged by year, the highest was 2.0 ppb, in 2021, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it wasn’t found.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.5 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.098 ppm

Highest yearly average, 2012 to 2015 · 2015 average: 0.08 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.098 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.18 ppm. In 2015, the latest year on file, its two samples averaged below the limit.

What handles it

About fluoride
PFBS, Health benchmark 2,000 ppt; highest 3.4 ppt

Highest sample, May 21, 2025; found in 1 of 10 · Comes from the source

The highest sample was 3.4 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 10 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 10 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 10 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 10 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 10 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits3.4 ppt highest, found in 1 of 10 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Arizona utilities above EPA’s PFAS limits⁠
29 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Arizona Water Co - Lakeside reported another disinfectant but neither chlorine nor chloramine, in its 2024 to 2025 sampling for EPA.

What that means

Most utilities add chlorine or chloramine, CDC says. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Arsenic, total trihalomethanes (TTHM), nitrate and haloacetic acids (HAA5) results here are Arizona’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Arizona Water Co - Lakeside’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Nov. 12, 2024 to May 21, 2025; CDC’s yearly averages for Arizona cover 2020 to 2023; EPA’s compliance samples are from Aug. 7, 2012 to June 22, 2015.

Testing your own tap

Arizona Water Co - Lakeside’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Arizona certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Arizona Water Co - Lakeside’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 7.8 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Arizona Water Co - Lakeside’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 2 labs Arizona certifies closest to the area Arizona Water Co - Lakeside serves, or a kit by mail

The 2 labs Arizona certifies closest to the area Arizona Water Co - Lakeside serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

All 49 certified labs for Arizona⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Arizona certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Arizona’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AZ0409003. Rebuilt from EPA data on Oct. 25, 2026.