Skip to content
TapBuff

Fort Washakie

EPA’s records have results for 38 contaminants in its water; 8 were found.

Serves 2,620 people · Surface water · Fort Washakie, WY

Serves
2,620 people
Connections
1,073
Water source
Surface water
Based in
Fort Washakie, WY
Owner
Native American
The 2 ZIP codes it serves

82514, 82520

The short answer

None of the results here is above a limit in force today. PFOA had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 4 to Dec. 4, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2011 to 2025.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, uranium, nitrate, arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from Feb. 13, 2012 to Oct. 28, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOA was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. None of the other 23 PFAS tested for was found.

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOA

Comes from the source

A sample above EPA’s 2029 limit

9.3 ppt

Highest sample, June 18, 2024; found in 1 of 10

The highest sample was 9.3 ppt, about 2.3 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 2.3 ppt, below it.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

21.5 ppb

Highest sample, March 4, 2024; found in 2 of 10

The highest sample was 21.5 ppb, about twice EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 6 results

Lead and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 63 ppb

Highest yearly average, 2012 to 2019 · 2019 average: 21.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 63 ppb, in 2016, below EPA’s legal limit of 80 ppb. Its highest single sample was 108 ppb. In 2019, the latest year on file, its 10 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility from 2012 to 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 46.5 ppb

Highest yearly average, 2012 to 2019 · 2019 average: 39.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 46.5 ppb, in 2017, below EPA’s legal limit of 60 ppb. Its highest single sample was 89 ppb. In 2019, the latest year on file, its four samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility from 2012 to 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Lead, Action level 15 ppb · health goal zero; 90th percentile 4.0 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 4.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.4 ppm

Highest yearly average, 2015 to 2019 · 2019 average: 0.1 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.4 ppm, in 2015, below EPA’s legal limit of 4.0 ppm. In 2019, the latest year on file, its three samples averaged below the limit.

What handles it

About fluoride
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 1.3 ppb

Highest yearly average, 2018 to 2019 · Comes from the source

Averaged by year, the highest was 1.3 ppb, in 2019, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.4 ppb. That was also the latest year on file.

What handles it

About uranium
Nitrate, Legal limit 10 ppm; highest 0.2 ppm

Highest sample; found in 4 of 5 · 2019 average: 0.13 ppm · Comes from the source

The highest sample, in 2019, was 0.2 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its four samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptA sample above EPA’s 2029 limit9.3 ppt highest, found in 1 of 10 samples. Details
PFOS4.0 pptNot foundNot found in any of 10 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 10 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 10 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 10 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 10 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Utilities above EPA’s PFAS limits, state by state⁠
30 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: PFOA Reduction, Lead Reduction

    For: PFOA, Lead

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctanoic Acid (PFOA), Lead Reduction, Uranium

    For: PFOA, Lead, Uranium

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

Fort Washakie reported disinfecting with chlorine, not chloramine, at all 4 of its sampling points, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Newer results, and everything else. Nitrate, arsenic, fluoride, chromium, uranium and disinfection byproduct results here come from EPA’s national compliance file, which ends in 2019. Fort Washakie’s own annual report, which it must send you every year, has newer results and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 4 to Dec. 4, 2024; EPA’s compliance samples are from Feb. 13, 2012 to Oct. 28, 2019.

Testing your own tap

Fort Washakie’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Wyoming certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Fort Washakie’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 4.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Fort Washakie’s results flag: PFOA and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The lab Wyoming certifies closest to the area Fort Washakie serves, or a kit by mail

The lab Wyoming certifies closest to the area Fort Washakie serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Sage West Healthcare - Lander (formerly Lander Regional Hospital)

    Lander, WY · about 14 miles

    Certified for bacteria

    (307) 335-6246

All 12 certified labs for Wyoming⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Wyoming certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Wyoming’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID 085690003. Rebuilt from EPA data on Oct. 25, 2026.