Skip to content
TapBuff

City of Casper

EPA’s and the City of Casper’s records have results for 36 contaminants in its water; 7 were found.

Serves 59,000 people · Surface water bought from another system · Casper, WY

Serves
59,000 people
Connections
22,754
Water source
Surface water bought from another system
Based in
Casper, WY
County
Natrona
Owner
Local government
The 3 ZIP codes it serves

82601, 82604, 82609

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for uranium and lead, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from June 12, 2023 to Sept. 10, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2005 to 2026.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), uranium, fluoride and nitrate: the annual water quality reports the City of Casper publishes, 2020 to 2025.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

56.7 ppb

Highest sample, March 18, 2024; found in 8 of 8

The highest sample was 56.7 ppb, about 5.7 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 6 results

Uranium and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest 50 ppb

Highest result, 2023 · Forms or is added in treatment

The highest sample, in 2023, was 50 ppb, below EPA’s legal limit of 80 ppb.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest 27 ppb

Highest result, 2023 · Forms or is added in treatment

The highest sample, in 2023, was 27 ppb, below EPA’s legal limit of 60 ppb.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Uranium, Legal limit 30 ppb · health goal zero; highest 7.8 ppb

Highest result, 2022 · Comes from the source

The highest sample, in 2022, was 7.8 ppb, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit.

What handles it

About uranium
Fluoride, Legal limit 4.0 ppm; highest 0.4 ppm

Highest result, 2021 · Forms or is added in treatment

The highest sample, in 2021, was 0.4 ppm, below EPA’s legal limit of 4.0 ppm.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.76 ppm

Highest result, 2023 · Comes from the source

The highest sample, in 2023, was 0.76 ppm, below EPA’s legal limit of 10 ppm.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.0 ppb

90th percentile, 2024 to 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Utilities above EPA’s PFAS limits, state by state⁠
29 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

Disinfectant

City of Casper reported adding chloramine before water enters its pipes, at all 2 of its sampling points, in its 2023 to 2024 sampling for EPA. It also reported ozone.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), uranium, fluoride and nitrate results here are from the annual water quality reports the City of Casper publishes, from 2020 on. City of Casper’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 12, 2023 to Sept. 10, 2024; the reports the City of Casper publishes cover 2020 to 2025.

Testing your own tap

City of Casper’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Wyoming certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Casper’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 1.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Casper’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The lab Wyoming certifies closest to the area City of Casper serves, or a kit by mail

The lab Wyoming certifies closest to the area City of Casper serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Energy Laboratories Inc

    Casper, WY · about 11 miles

    Certified for bacteria, nitrate, minerals and other inorganics, organic chemicals, radioactivity

    (307) 235-0515

All 12 certified labs for Wyoming⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Wyoming certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Wyoming’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WY5601415. Rebuilt from EPA data on Oct. 25, 2026.