Skip to content
TapBuff

Preston County PSD 1

EPA’s and West Virginia’s records have results for 38 contaminants in its water; 7 were found.

Serves 3,455 people · Surface water · Reedsville, WV

Serves
3,455 people
Connections
1,515
Water source
Surface water
Based in
Reedsville, WV
County
Preston
Owner
Local government
The 7 ZIP codes it serves

26374, 26410, 26520, 26524, 26537, 26542, 26547

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 14 health-based violations since 2016, all resolved in EPA’s file.

Filters for lead and uranium, if you want them lower⁠The 14 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 22 to Dec. 18, 2023.

Lead and copper: EPA SDWIS monitoring periods ending 2020 to 2025.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, chromium (total), uranium and arsenic: West Virginia’s own results, samples taken from Feb. 18, 2020 to Sept. 4, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 7 results

Lead and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 55.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 48.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 55.6 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 109 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 55.2 ppb, in 2016, and EPA recorded violations in 2016 and 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 56.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 46.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 56.9 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 116 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 79.6 ppb, in 2018, and EPA recorded violations in 2018 and 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.0 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.81 ppm · Forms or is added in treatment

Averaged by year, the highest was 1.0 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.6 ppm. In 2026, the latest year on file, its 10 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.94 ppm, in 2012.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.4 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Nitrate, Legal limit 10 ppm; highest 0.74 ppm

Highest sample; found in 14 of 16 · 2026, one sample: 0.19 ppm · Comes from the source

The highest sample, in 2020, was 0.74 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.4 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 0.91 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.91 ppb, in 2023, below EPA’s legal limit of 100 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.039 ppb

Highest yearly average, 2023 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.039 ppb, in 2023, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 0.088 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

About uranium
West Virginia utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

14 health-based violations since 2016, 4 for dichloromethane, 4 for total Haloacetic Acids (HAA5), 3 for TTHM, 1 for total organic carbon, 1 for the Interim Enhanced Surface Water Treatment Rule and 1 for the Revised Total Coliform Rule. The latest began Jan. 1, 2023.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total organic carbonNot enough organic matter was removed. It reacts with disinfectant to form byproducts.EPA: Treatment Technique Precursor RemovalJan. 1, 2023 to March 31, 2023Resolved
DichloromethaneThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2019 to Dec. 31, 2019, 0.017 MG/LResolved
July 1, 2019 to Sept. 30, 2019, 0.022 MG/LResolved
April 1, 2019 to June 30, 2019, 0.022 MG/LResolved
DichloromethaneA sample was above the legal limit, for a contaminant judged one sample at a time.EPA: Maximum Contaminant Level Violation, Single SampleJan. 1, 2019 to March 31, 2019, 0.022 MG/LResolved
The other 9, back to 2016
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2019 to March 31, 2019, 81 ppbResolved
Interim Enhanced Surface Water Treatment RuleToo many readings in a month showed cloudiness above the filtration standard.EPA: Monthly Turbidity Exceed (Enhanced SWTR)Nov. 1, 2018 to Nov. 30, 2018Resolved
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2018 to Dec. 31, 2018, 89 ppbResolved
July 1, 2018 to Sept. 30, 2018, 99 ppbResolved
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)May 19, 2017Resolved
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageApril 1, 2017 to June 30, 2017, 65 ppbResolved
Jan. 1, 2017 to March 31, 2017, 63 ppbResolved
Oct. 1, 2016 to Dec. 31, 2016, 65 ppbResolved
July 1, 2016 to Sept. 30, 2016, 61 ppbResolved

Health-based violations only. 76 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

Disinfectant

Preston County PSD 1 reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, chromium (total), uranium and arsenic results here are West Virginia’s own from 2020 on, with EPA’s national file for 2012 to 2019. Preston County PSD 1’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 22 to Dec. 18, 2023; West Virginia’s results run from Feb. 18, 2020 to Sept. 4, 2026.

Testing your own tap

Preston County PSD 1’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab West Virginia certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Preston County PSD 1’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 2.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs West Virginia certifies closest to the area Preston County PSD 1 serves, or a kit by mail

The 3 labs West Virginia certifies closest to the area Preston County PSD 1 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Pace Analytical Services, LLC - Morgantown WV

    Morgantown, WV · about 16 miles

    Certified for bacteria

  • Sturm Environmental Services

    Bridgeport, WV · about 26 miles

    Certified for bacteria

  • West Virginia Department of Agriculture / Moorefield Field Office

    Moorefield, WV · about 56 miles

    Certified for bacteria

All 50 certified labs for West Virginia⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that West Virginia certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against West Virginia’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WV3303912. Rebuilt from EPA data on Oct. 25, 2026.