Skip to content
TapBuff

Logan County PSD - Northern Regional

EPA’s and West Virginia’s records have results for 37 contaminants in its water; 6 were found.

Serves 16,822 people · Surface water · Logan, WV

Serves
16,822 people
Connections
7,352
Water source
Surface water
Based in
Logan, WV
County
Logan
Owner
Local government
The 26 ZIP codes it serves

25053, 25076, 25108, 25121, 25505, 25508, 25511, 25524, 25534, 25547, 25557, 25601, 25612, 25624, 25625, 25632, 25637, 25638, 25639, 25644, 25646, 25647, 25649, 25652, 25653, 25666

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 8 health-based violations since 2016, 1 with no fix on record in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

The 8 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Oct. 17, 2024 to July 28, 2025.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, chromium (total) and arsenic: West Virginia’s own results, samples taken from Feb. 25, 2020 to Aug. 31, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

23 ppb

Highest sample, Oct. 17, 2024; found in 4 of 4

The highest sample was 23 ppb, about 2.3 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 50.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 35.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 50.7 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 92 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 44.1 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 63.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 63.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 63.9 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 128 ppb. In 2026, the latest year on file, its 13 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 66.7 ppb, in 2015, and EPA recorded violations in 2015 and 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.83 ppm

Highest yearly average, 2020 to 2026 · 2026, one sample: 0.71 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.83 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.4 ppm, in 2014.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.55 ppm

Highest sample; found in 7 of 7 · 2026, one sample: 0.46 ppm · Comes from the source

The highest sample, in 2025, was 0.55 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.68 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 0.35 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.35 ppb, in 2021, below EPA’s legal limit of 100 ppb. Its highest single sample was 0.7 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.6 ppb, in 2016.

What handles it

About chromium (total)
West Virginia utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

8 health-based violations since 2016, 4 for the Long Term 2 Enhanced Surface Water Treatment Rule, 3 for TTHM and 1 for the Revised Total Coliform Rule. The latest began Jan. 1, 2026, and 1 has no fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Long Term 2 Enhanced Surface Water Treatment RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyJan. 1, 2026Resolved
Aug. 27, 2023Resolved
Dec. 27, 2020Resolved
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)Oct. 5, 2020Resolved
Long Term 2 Enhanced Surface Water Treatment RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyFeb. 18, 2018No fix on recordEPA: addressed
The other 3, back to 2016
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2016 to Sept. 30, 2016, 95 ppbResolved
April 1, 2016 to June 30, 2016, 87 ppbResolved
Jan. 1, 2016 to March 31, 2016, 80.4 ppbResolved

Health-based violations only. 66 monitoring or reporting violations not shown.

Disinfectant

Logan County PSD - Northern Regional reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 to 2025 sampling for EPA. It also reported permanganate.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, chromium (total) and arsenic results here are West Virginia’s own from 2020 on, with EPA’s national file for 2012 to 2019. Logan County PSD - Northern Regional’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Oct. 17, 2024 to July 28, 2025; West Virginia’s results run from Feb. 25, 2020 to Aug. 31, 2026.

Testing your own tap

Logan County PSD - Northern Regional’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab West Virginia certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Logan County PSD - Northern Regional’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Logan County PSD - Northern Regional’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs West Virginia certifies closest to the area Logan County PSD - Northern Regional serves, or a kit by mail

The 3 labs West Virginia certifies closest to the area Logan County PSD - Northern Regional serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Pace Analytical Services, LLC - Pikeville

    Pikeville, KY · about 37 miles

    Certified for bacteria

  • West Virginia Dept. of Health - Office of Lab Services, Chemistry

    Charleston, WV · about 41 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics, disinfection byproducts

  • West Virginia Dept. of Health - Office of Lab Services, Microbiology

    Charleston, WV · about 41 miles

    Certified for bacteria

All 50 certified labs for West Virginia⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that West Virginia certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against West Virginia’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WV3302364. Rebuilt from EPA data on Oct. 25, 2026.