Skip to content
TapBuff

City of Welch

EPA’s and West Virginia’s records have results for 8 contaminants in its water; 7 were found.

Serves 2,907 people · Groundwater · Welch, WV

Serves
2,907 people
Connections
1,009
Water source
Groundwater
Based in
Welch, WV
County
McDowell
Owner
Local government
The 3 ZIP codes it serves

24801, 24853, 24878

The short answer

Haloacetic acids (HAA5) averaged above its legal limit’s level in 2023, with no violation recorded. 5 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for lead and uranium, if you want them lower⁠The 5 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 2011 to 2023.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.4 ppm, for the period ending June 30, 1996. None since is on file, so it is not counted as a current finding.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, chromium (total), nitrate, uranium and arsenic: West Virginia’s own results, samples taken from March 17, 2020 to Sept. 15, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Above the limit’s level, no violation recorded, 1 result

Haloacetic acids (HAA5)

Forms or is added in treatment

Above the limit’s level, no violation

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health.

63.4 ppb

Highest yearly average, 2020 to 2026

2026 average: 6.7 ppb

Averaged by year, the highest was 63.4 ppb, in 2023, above EPA’s legal limit of 60 ppb. Its highest single sample was 157 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

How it’s judged

EPA judges this limit on running averages at each sampling point. Results like these with no violation often include water sampled before treatment or blending; the utility’s annual report says what reaches the tap.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 34.9 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

Below EPA’s limits, 6 results

Lead and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 46.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 42.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 46.1 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 73 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 52.6 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.1 ppm

Highest yearly average, 2022 to 2026 · 2026 average: 0.87 ppm · Forms or is added in treatment

Averaged by year, the highest was 1.1 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.3 ppm. In 2026, the latest year on file, its 10 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.92 ppm, in 2017.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.2 ppb

90th percentile, 2021 to 2023 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.2 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Chromium (total), Legal limit 100 ppb; highest yearly average 6.2 ppb

Highest yearly average, 2022 to 2026 · 2026, one sample: 2.9 ppb · Comes from the source

Averaged by year, the highest was 6.2 ppb, in 2022, below EPA’s legal limit of 100 ppb. In 2026, the latest year on file, its one sample was below the limit.

What handles it

About chromium (total)
Nitrate, Legal limit 10 ppm; highest 0.42 ppm

Highest sample; found in 9 of 9 · 2026, one sample: 0.37 ppm · Comes from the source

The highest sample, in 2022, was 0.42 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.41 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.52 ppb

Highest yearly average, 2025 · Comes from the source

Averaged by year, the highest was 0.52 ppb, in 2025, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That is the only year on file.

What handles it

About uranium
One compound tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic

Violations since 2016

5 health-based violations since 2016, 4 for the Groundwater Rule and 1 for the Revised Total Coliform Rule. The latest began Oct. 31, 2025.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)Oct. 31, 2025Resolved
Groundwater RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyAug. 7, 2022Resolved
Aug. 7, 2022Resolved
Aug. 7, 2022Resolved
Sept. 11, 2017Resolved

Health-based violations only. 25 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, chromium (total), nitrate, uranium and arsenic results here are West Virginia’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Welch’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; West Virginia’s results run from March 17, 2020 to Sept. 15, 2026.

Testing your own tap

City of Welch’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab West Virginia certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Welch’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 1.2 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Welch’s results flag: haloacetic acids (HAA5). It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs West Virginia certifies closest to the area City of Welch serves, or a kit by mail

The 3 labs West Virginia certifies closest to the area City of Welch serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Analabs, Inc.

    Crab Orchard, WV · about 27 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, disinfection byproducts

  • Pace Analytical Services, LLC - Beaver

    Beaver, WV · about 34 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, radioactivity

  • Pace Analytical Services, LLC - Pikeville

    Pikeville, KY · about 52 miles

    Certified for bacteria

All 50 certified labs for West Virginia⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that West Virginia certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against West Virginia’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WV3302421. Rebuilt from EPA data on Oct. 25, 2026.