Skip to content
TapBuff

Soos Creek Water & Sewer District

EPA’s and Washington’s records have results for 32 contaminants in its water; 2 were found.

Serves 74,172 people · Surface water bought from another system · Renton, WA

Serves
74,172 people
Connections
23,903
Water source
Surface water bought from another system
Based in
Renton, WA
County
King
Owner
Local government
The 5 ZIP codes it serves

98031, 98038, 98042, 98055, 98058

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium, plus nitrate, arsenic and other regulated chemicals, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 11 to Nov. 13, 2025.

Haloacetic acids (HAA5) and total trihalomethanes (TTHM): Washington’s own results, samples taken from March 3, 2020 to Sept. 3, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 2 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 40.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 28.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 40.3 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 82.1 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 37.4 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 35.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 28.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 35.8 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 59.4 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 35.5 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Washington utilities above EPA’s PFAS limits⁠
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Soos Creek Water & Sewer District’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 11 to Nov. 13, 2025; Washington’s results run from March 3, 2020 to Sept. 3, 2026.

Testing your own tap

Soos Creek Water & Sewer District’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. About lead.
The 3 labs Washington certifies closest to the area Soos Creek Water & Sewer District serves, or a kit by mail

The 3 labs Washington certifies closest to the area Soos Creek Water & Sewer District serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • AmTest Laboratories

    Renton, WA · about 6 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, disinfection byproducts

    (425) 885-1664

  • Aqua Test, Incorporated

    Maple Valley, WA · about 8 miles

    Certified for bacteria, nitrate

    (425) 432-9360

  • Analytical Resources, LLC

    Tukwila, WA · about 10 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (206) 695-6200

All 84 certified labs for Washington⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Washington certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Washington’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WA5340100. Rebuilt from EPA data on Oct. 25, 2026.