Skip to content
TapBuff

City of Pacific

EPA’s and Washington’s records have results for 37 contaminants in its water; 4 were found.

Serves 7,925 people · Groundwater · Othello, WA

Serves
7,925 people
Connections
2,981
Water source
Groundwater
Based in
Othello, WA
County
King
Owner
Local government
The 2 ZIP codes it serves

98001, 98047

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 22 to Oct. 22, 2025.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 2.2 ppm, for the period ending Dec. 31, 2007. None since is on file, so it is not counted as a current finding.

Total trihalomethanes (TTHM), nitrate and haloacetic acids (HAA5): Washington’s own results, samples taken from July 14, 2020 to Aug. 25, 2026, with EPA’s 2012 to 2019 file for earlier years.

Arsenic, chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from May 11, 2018 to May 11, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFBS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. None of the other 23 PFAS tested for was found.

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 8.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 8.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 8.6 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 11 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 8.3 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 0.94 ppm

Highest sample; found in 6 of 6 · 2025, one sample: 0.94 ppm · Comes from the source

The highest sample, in 2025, was 0.94 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.9 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 2.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 1.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 2.1 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 2.1 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.4 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFBS, Health benchmark 2,000 ppt; highest 8.3 ppt

Highest sample, Oct. 22, 2025; found in 1 of 2 · Comes from the source

The highest sample was 8.3 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 2 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 2 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 2 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 2 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 2 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits8.3 ppt highest, found in 1 of 2 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Washington utilities above EPA’s PFAS limits⁠
33 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

City of Pacific reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate and haloacetic acids (HAA5) results here are Washington’s own from 2020 on, with EPA’s national file for 2012 to 2019. Arsenic, chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. City of Pacific’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 22 to Oct. 22, 2025; Washington’s results run from July 14, 2020 to Aug. 25, 2026; EPA’s compliance samples are from May 11 to 11, 2018.

Testing your own tap

City of Pacific’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Washington certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Pacific’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Washington certifies closest to the area City of Pacific serves, or a kit by mail

The 3 labs Washington certifies closest to the area City of Pacific serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Water Management Laboratories, Inc.

    Tacoma, WA · about 9 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (253) 531-3121

  • AmTest Laboratories

    Renton, WA · about 13 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, disinfection byproducts

    (425) 885-1664

  • Analytical Resources, LLC

    Tukwila, WA · about 14 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (206) 695-6200

All 84 certified labs for Washington⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Washington certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Washington’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID WA5365300. Rebuilt from EPA data on Oct. 25, 2026.